Skid Mounted, Perkins Diesel Engine, 264 kW, 330 KVA, 380/220 Volts, 3 Phase, Seperate Fuel tank. No CE certificate available from seller - No CE mark on machine. **Not Functionally Tested**
Meter Reading:
5,550 Hours
Serial Number:
Location:
Castilla y Leon, Spain
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Description:
As-is, where-is with no IronClad Assurance. See Details
Payment:
Payment due within 3 business days after auction. See Details
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform as expected
NOTE: This item is offered as-is, where-is with No IronClad Assurance. IronPlanet claims no responsibility for the condition or description. This item does not include any protection offered by IronClad Assurance.
General Appearance
CE Certificate Available
No CE certificate available from seller - No CE mark on machine
Paint
Scratches; Chips
Sheet Metal (fiberglass) Condition
Minor dents; Scrapes; Missing panels; exterior covers are missing
General Appearance #1
Control Station
Hour Meter Reading
Reading: 5,550 Hours;
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check
Some components could not be operationally checked.; The item was not operational. Ratings are based on a static inspection.
Hour Meter Reading
Engine
Make and Model
Perkins; SGK060202U151 Engine; Serial:- 961541
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Machine not started so it could be tested.
Starter
No batteries in machine to test.
Fuel System
Seepage
Exhaust System
See photos for condition; Disassembled from the Engine.
Radiator
Oil Leaks
See photos; Seepage: Side of engine; Seepage: Front of engine
Fuel Leaks
See photos; Seepage: Injection pump
Cooling System Leaks
None seen
Limited Function Check
The engine could not be started. The Fuel tank was Disconnected. There Batteries were missing. Some components could not be operationally checked. See oil report.
Engine #1
Generator
The generator was not load checked during the inspection. IronPlanet does not guarantee the generators ability to run at its full rated kW output.
Generator Make and Model
FG Wilson; HCK44D generator; Serial:- CO68491701
Operating Voltage
330/220
Cables and Connections
Emergency Shut Off Switch
Not operationally checked.
Limited Function Check
The unit could not be started and run. Several components could not be properly checked.
Generator #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Overall Length and Width
3400mm long x 1000mm wide
Fuel Tank Condition
The Fuel Tank is not connected to the Machine.
Chassis #1
Oil Sample Analysis
Engine
date of analysis
Jun 19, 2012
Silicon
9 PPM
Lead
39 PPM
Tin
0 PPM
Copper
5 PPM
Aluminum
14 PPM
Silver
N/A
Nickel
2 PPM
Chromium
2.7 PPM
Iron
44 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
As highlighted above, this item is offered As-Is, Where-Is, with no IronClad Assurance® protection. IronPlanet did not inspect this item and claims no responsibility for the condition or description. A buyer may not submit a dispute claim on this item.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 9-16hs - Call at least 24hs in advance
Check loading facilities with the seller
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
