Not original paint; Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition
Minor dents; Scrapes; Surface rust in areas; Sheet metal erosion in areas; Weld repairs; Welded door hinges; Bent doors; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
No visible damage
General Appearance #1
Control Station
Mirrors
No visible damage
Glass
No visible damage
Seats/Armrests
Seat Belts
Not equipped
Hydraulic Controls
Loose
Steering Control
Stiff
Drivetrain Controls
Stiff
Oil Pressure
Warning light inoperable
Exterior Lights Operational
No
Warning Lights
Inoperable
Travel Alarm
Inoperable
Gauges
Operational
Hour Meter/Odometer
1,216 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
Limited Function Check (cs)
The main components operated except as noted.
Hour Meter/Odometer
Engine
Make and Model
Caterpillar 3208 engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Fuel System
Operational
Exhaust System
Dented muffler
Radiator
Minor plugging of fins
Oil Leaks
See photos; Fluid Accumulation: Oil Pan
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check (Engine)
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational; Seepage
Front Drive Axle
Fluid Accumulation
Final Drives
Limited Function Check
The drivetrain was operational. See oil report.
Drivetrain #1
Chassis Lift
A propane fuel tank will not be included with this unit at the time of sale. IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Mast/Boom Condition
Moderate wear
Chain / Tensioners
Moderate wear
Carriage Rollers and Guides
Moderate wear
Load Back Rest
Side Shift
Yes; Fork positioner
Forks
88" forks; Hole in tips
Steering Linkage
Minor to moderate movement
Steering Wheel Play
Minor to moderate movement
Frame Condition
Master Cylinder/Brake Control
Soft pedal
Park Brake
Held against power
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
10.00-20 front tires; 10.00-20 rear tires
Tire Condition
Minor cuts and gouges; See photos
Wheel Condition
Wheel Studs
Chassis Lift #1
Hydraulics
Pumps (Hydraulics)
Fluid accumulation
Valves
Hydraulic Tank
Hoses (Hydraulics)
Steering Cylinders
Minor to moderate pin and bushing movement
Mast Lift Cylinders
Oil accumulation on the center cylinder; Minor to moderate pin and bushing movement
Fork Tilt Cylinders
Minor to moderate pin and bushing movement; Loose pin
Side Shift Cylinder
Minimal pin and bushing movement at fork positioning cylinders
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Jun 06, 2012
Jun 06, 2012
Silicon
8 PPM
4 PPM
Lead
10 PPM
0 PPM
Tin
3 PPM
0 PPM
Copper
3 PPM
7 PPM
Aluminum
4 PPM
3 PPM
Silver
0 PPM
0.1 PPM
Nickel
0.8 PPM
0.3 PPM
Chromium
0.7 PPM
0 PPM
Iron
36 PPM
27 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am-4pm
POC will help load machine at buyers expense, 2-4 days notice needs to be given to POC
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 26.
This item is subject to Missouri sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
