Enclosed Cab, Heater, 140hp Volvo Diesel Engine, Manual Transmission, 540 rpm PTO (6 splines), 11,00-16 Front Tires, 710/70R38 Rear Tires, Rear Remote Hydraulic Circuits, Drawbar, No CE certificate available from seller - No CE mark on machine,
Meter Reading:
5,944 Hours
Serial Number:
Location:
Aarhus, Denmark
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - No CE mark on machine
Paint
Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition
Minor dents/scratches; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Glass
See photos for condition; Front: Plexiglass; Left: Plexiglass; Rear: Plexiglass; Left door bottum vindow, and lower behind.
Seats/Armrests
Torn cover; Damaged cushion; See photos for condition
Seat Belts
Not equipped
Horn
Inoperable
Control Lock Lever
Hydraulic Controls
Stiff
Steering Control
Minor to moderate steering wheel play
Drivetrain Controls
Controls stick
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
No
Warning Lights
Inoperable
Gauges
Inoperable
Hour Meter/Odometer
5944,36 Hours; Operational hour meter; Inoperable hour meter; Hourmeter is not counting correctly, tractor have been running approx 1 hour during the inspection and only 0.03 hrs recorded.
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
Limited Function Check (cs)
The main components operated except as noted.
Hour Meter/Odometer (Start)
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage; See photos for condition
Radiator
Minor plugging of fins
Oil Leaks
See photos; Fluid Accumulation: Valve cover
Fuel Leaks
See photos; Fluid Accumulation: Fuel line
Cooling System Leaks
None seen; See photos
Limited Function Check (Engine)
After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting.; The engine was difficult to start and ran rough.; Engine is only running on 4 to 5 cylinders. And ran with some noise. SEE OIL REPORT.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Clutch
Engages
Rear Drive Axle
Final Drives
Fluid Accumulation
PTO
Inoperable; 540 rpm (6 splines)
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Articulating Center Pins
Minimal movement
Steering Wheel Play
Minor to moderate movement
Frame Condition
Rusty
Limited Function Check
The main chassis components were operational in a limited check.
Brake Type
Hydraulic
Master Cylinder/Brake Control
Low pedal
Brake Lines/Hoses
Not operationally checked
Park Brake
Inoperable
Limited Function Check
Service brakes are weak.
Tire Size
11,00-16 Front tires; 710/70R38 Rear tires; LF No brand; LR Michelin; RR Michelin
Tire Condition
Minor cuts and gouges; See photos
Chassis #1
Hydraulics
Pumps (Hydraulics)
Number of Hydraulic Circuits
Rear: 2
Rear Remote Hydraulic Circuits
Not operationally checked
Valves
Fluid accumulation
Hydraulic Tank
Hoses (Hydraulics)
Weathered
Limited Function Check
The hydraulic system was operational without a load. SEE OIL REPORT.
Hydraulics #1
Specialty
3-Point Linkage
Missing draft arm linkage
Drawbar
Pin holes worn
Specialty #1
Oil Sample Analysis
engine
hydraulic
date of analysis
Jul 13, 2012
Jul 13, 2012
Silver
N/A
N/A
Water
0
0
Aluminum
6 PPM
1 PPM
Chromium
3.4 PPM
0.2 PPM
Nickel
1 PPM
0 PPM
Copper
11 PPM
13 PPM
Iron
74 PPM
15 PPM
Silicon
8 PPM
5 PPM
Glycol
0
0
Tin
2 PPM
0 PPM
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 7am to 4pm
No
Loading Dock Available
Ramps Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 30.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
