Enclosed Cab, Heater, Ford Diesel Engine, Manual Transmission, 2WD, 3-Point Hitch, Front 3-Point Hitch, 11.5/80-15.3 Front Tires, 13.6-36 Rear Tires, 1950mm Wide Sweeper, Asphalt Sprinkler System. No CE certificate available from seller - No CE mark on machine.
Meter Reading:
4,864 Hours
Serial Number:
Location:
Vaasa, Finland
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Registration Documents Available from Seller (See Photos in Additional Photos Section)
General Appearance
CE Certificate Available
No CE certificate available from seller - No CE mark on machine
Paint
Touch up paint; Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition
Minor dents/scratches; Surface rust; Bent panels; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
No visible damage
Glass
Seats/Armrests
Missing armrest
Seat Belts
Operational
Horn
Inoperable
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Hour Meter/Odometer
4,864 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
Limited Function Check
The main components are in place and operational.
Hour Meter/Odometer (Start)
Engine
Make and Model
Make: Ford ; Model: 2805900KC4
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Not able to Check
Starter
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The Engine was Difficult to due to a fuel problem. It stopped running after a few minutes. See oil report.
Engine #1
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Limited Function Check
The drivetrain could not be operationally checked.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Steering Wheel Play
Minor to moderate movement
Frame Condition
Limited Function Check
The main components were operational except as noted.
Brake Type
Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Unable to test with slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
11.5/80 15.3 Front tires; 13.6-36 Rear tires; LF Eurogrip ; RF Goodyear ; LR Stomil ; RR Stomil
Tread Depth
LF 12/32"; LR 2/32"; RR 14mm /32"; RF 14mm /32"
Wheel Condition
Wheel Studs
Chassis #1
Hydraulics
Pumps (Hydraulics)
Not operationally checked
Hydraulic Motors
Not operationally checked
Hydraulic Tank
Hoses (Hydraulics)
Cylinder(s)
Cylinder Pins and Bushings
Minor to moderate movement
Limited Function Check
The hydraulic system was not operationally checked. See oil report.
Hydraulics #1
Specialty
Tilt Linkage Pins and Bushings
Minor to moderate movement
3-Point Linkage
Specialty #1
Additional Photos
Registartion Documents
Originals Available from Seller.
Photo #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Jun 19, 2012
Jun 19, 2012
Silicon
18 PPM
0 PPM
Lead
3 PPM
0 PPM
Tin
2 PPM
0 PPM
Copper
4 PPM
1 PPM
Aluminum
12 PPM
0 PPM
Silver
N/A
N/A
Nickel
2 PPM
0 PPM
Chromium
16.6 PPM
0.2 PPM
Iron
144 PPM
3 PPM
Glycol
0
N/A
Water
0
NEG
Fuel
N/A
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:00am to 4:30pm
No
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 30.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
