Enclosed Cab, Heater, Case 6 Cylinder Engine, Partial Powershift, 1000 rpm PTO (21 splines / 1-3/8" OD), 14-16.1 Front Tires, 18.4-38 Rear Tires, Rear Remote Hydraulic Circuits, Rear Wheel Counterweights. IronPlanet cannot generate a NAFTA Certificate for this unit. Buyers from Mexico and Canada should check with their export agent to determine if any additional fees apply.***This item must be removed from Seller’s location within 14 days after the sale. Failure to remove the item in that time frame will result in the buyer being liable for $25/day storage.
Meter Reading:
6,459 Hours
Serial Number:
Location:
Wyoming, United States
Zip/Postal Code:82240
(Goshen County)
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Minor dents; scrapes; missing panels; door handle missing; see photos
Steps/Ladders
No visible damage
Hand Rails
No visible damage
General Appearance #1
Control Station
Glass
Right: missing; front lower cab window broken; damaged weather-stripping
Seats/Armrests
Seat Belts
Inoperable retract
Hydraulic Controls
Not operationally checked
Steering Control
Loose steering column
Drivetrain Controls
1 gear forward/reverse without kicking out of gear; grinding; not going into gear; broken shifter rod
Oil Pressure
The gauge registers in the operating range.
Exterior Lights Operational
Yes; some inoperable
Gauges
Inoperable gauges: transmission filter
Hour Meter/Odometer
6,459 Hours - Operational Hour Meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
Limited Function Check (cs)
The main components operated except as noted.
Hour Meter/Odometer
Engine
Make and Model
Case 6 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Significant; see photos
Starter
Operational; switch is outside by starter; battery disconnect inoperable
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Neck damaged
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check (Engine)
After jump starting the engine ran. The engine would not re-start after shutting down. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drivetrain Type
Two Wheel Drive
Transmission
Shifter rod is broken; the gears could not be operationally checked; low fluid level
Rear Drive Axle
Fluid accumulation
PTO
1,000 rpm (21 splines/ 1-3/8" OD)
Front Axle Configuration
Rigid mount with fixed pivot point
Limited Function Check
There was only 1 F/R gear operational at time of inspection, because of the broken shifter rod. Some components could not be operationally checked.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Steering Wheel Play
Minor to moderate movement
Frame Condition
Limited Function Check
The main components were operational with movement as indicated.
Brake Type
Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Inoperable
Limited Function Check
The service brakes performed. The park brake would not hold the machine.
Tire Size
14-16.1 front tires; 18.4-38 rear tires; Armstrong; Goodyear
Tire Condition
Minor cuts and gouges; weathered; see photos
Tread Depth
LF 34/32"; LR 32/32"; RR 47/64th ,RF 49/64th
Wheel Condition
Rusty
Wheel Studs
Chassis #1
Hydraulics
Pumps (Hydraulics)
Not operationally checked
Number of Hydraulic Circuits
Rear: 2
Valves
Not operationally checked
Hoses (Hydraulics)
Worn; weathered
Limited Function Check
The hydraulic system was not operationally checked.
Hydraulics #1
Specialty
Drawbar
Pin holes worn
Counterweights
Rear: Inside wheel hubs
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Feb 03, 2012
Feb 03, 2012
Silicon
85 PPM
4 PPM
Lead
761 PPM
15 PPM
Tin
24 PPM
0 PPM
Copper
281 PPM
41 PPM
Aluminum
16 PPM
0 PPM
Silver
0.3 PPM
0.1 PPM
Nickel
4.2 PPM
0.2 PPM
Chromium
15 PPM
0.3 PPM
Iron
462 PPM
16 PPM
Glycol
POS
N/A
Water
POS
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am to 4PM, Mon-Fri
You must call at least 24 hours in advance to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before August 7.
This item is subject to Wyoming sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
