Scrapes; Dents; Surface rust in areas; Holes drilled in structure on Cab/Canopy Overhead; Bent/damaged panels; Cracks; Missing some bolts & hardware; Cat walks have damage; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Broken
Glass
See photos for condition; Front: Plexiglass; Right: Plexiglass
Seats/Armrests
See photos for condition
Seat Belts
Operational
Safety Lock Out/Stop
Hydraulic Controls
Drivetrain Controls
Oil Pressure
The gauge registers in the operating range.
Exterior Lights Operational
No; Some missing
Warning Lights
Operational
Travel Alarm
Operational
Gauges
Operational
Hour Meter/Odometer
Unknown hours; Missing
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Inoperable; Vents damaged; Fan inoperable some or all speeds
Heater
Inoperable; Fan inoperable some or all speeds
Limited Function Check (cs)
The main components operated except as noted. Cab station has wear with some damage
Hour Meter/Odometer
Engine
Make and Model
Caterpillar 3306 engine; Serial #: 08Z58475
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational; Seepage
Exhaust System
No visible damage; See photos for condition
Radiator
Minor plugging of fins
Oil Leaks
See photos; Seepage: Valve cover; Seepage: Side of engine; Seepage: Front of engine; Seepage: Oil Pan; Dripping Leak: Side of engine; Dripping Leak: Front of engine
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check (Engine)
The engine started and ran with leaks. The engine started and ran with smoke that did not completely clear. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Final Drives
Limited Function Check
The drivetrain functioned without a load. Limited testing due to track pad condition
Hydraulics
Pumps (Hydraulics)
Fluid accumulation; Seepage
Valves
Fluid accumulation; Seepage
Hydraulic Tank
High oil level
Hoses (Hydraulics)
Seepage; Boom/Stick: Loose; On machine: Loose; Boom/Stick: Worn; On machine: Worn; Boom/Stick: Seepage; On machine: Seepage; Boom/Stick: Braid exposure; On machine: Braid exposure
Auxiliary Hydraulic Plumbing
Operational
Swing Motor
Boom Lift Cylinder(s)
Dripping leak on the left cylinder; Dripping leak on the right cylinder; Minor to moderate pin and bushing movement
Stick Cylinder
Minor to moderate pin and bushing movement
Bucket Cylinder
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Scratched; Minor dents on bottom of boom
Stick Condition
Scratched; Minor dents on inside of stick
Boom Base Pin and Bushings
Heavy movement; Has crack in base pin ear
Pin and Bushings Boom to Stick
Minor to moderate movement
Pin and Bushings Stick to Bucket
Minor to moderate movement
Pins and Bushings Stick to Coupler
Minor to moderate movement
Turn-table Bearing
Performs within tolerance expected for age and hours; Minor to moderate movement
Bottom Covers
Bent; Missing bolts; Oily
Roller Frames
Cracked; Bent panels; Missing bolts
Limited Function Check
The main components were operational with movement as indicated. The main components were operational with damage as noted.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall width (outside to outside of shoes)
11' 9" Overall width
Track Tensioners
See photos for condition
Shoe Width
36" track shoes; Bent pads; Broken pads; Loose/missing bolts
Grouser Height
Left Side: 30 mm; Right Side: 30 mm
Track link wear
See photos for condition
Pins and Bushings Turned?
No
Pins and bushing wear
See photos for condition
Carrier Rollers Wear
See photos for condition; Loose bearings
Track Rollers Wear
See photos for condition
Idlers
See photos for condition
Sprockets
See photos for condition
Pins and Bushings Turned?
Specialty
Excavator Bucket Condition
56" bucket; Worn
Backhoe / Excavator Bucket Shanks and Teeth
Has tooth, but missing keeper
Attachment (Other)
NPK H-12X Breaker; functional; SN:38429; Lube system does not work
Specialty #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
May 22, 2012
May 22, 2012
Silicon
26 PPM
6 PPM
Lead
93 PPM
1 PPM
Tin
7 PPM
0 PPM
Copper
91 PPM
4 PPM
Aluminum
10 PPM
1 PPM
Silver
0.2 PPM
0 PPM
Nickel
1.3 PPM
0.2 PPM
Chromium
1.4 PPM
0.2 PPM
Iron
73 PPM
2 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: M-F 9:00 Am - 4:00 PM
Call 48 hours in advance of pick-up
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 19.
This item is subject to Tennessee sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
