No CE certificate available from seller - CE mark on machine
Paint
See photos for condition
Sheet Metal (fiberglass) Condition
Minor dents; Scrapes; Cracks; Surface rust; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
CE Certificate Available
Control Station
Mirrors
Cracked
Glass
See photos for condition
Seats/Armrests
Torn cover; See photos for condition
Seat Belts
Operational
Horn
Operational
Safety Lock Out/Stop
Hydraulic Controls
Controls stick
Drivetrain Controls
Foot pedal sticks
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Warning Lights
Operational
Gauges
Operational
Hour Meter/Odometer
2,207 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational
Limited Function Check (cs)
The main components are in place and operational.
Hour Meter/Odometer (Start)
Engine
Make and Model
Mitsubishi; L3E W262 Engine; Serial #: 1167146
Fuel Type
Diesel
Emission Control Label
US EPA certification label
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Fuel System
Operational
Exhaust System
Rust penetration; See photos for condition
Radiator
Minor plugging of fins
Oil Leaks
None seen; See photos
Fuel Leaks
None seen; See photos
Cooling System Leaks
None seen; See photos
Limited Function Check (Engine)
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Final Drives
Drive Line
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #5
Hydraulics
Pumps (Hydraulics)
Valves
Wet with residue
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Not Operationally checked.
Boom Swing Cylinders
Minimal pin and bushing movement
Swing Motor
Boom Lift Cylinder(s)
Minimal pin and bushing movement
Stick Cylinder
Minimal pin and bushing movement
Bucket Cylinder
Minimal pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load. See oil report.
Hydraulics #15
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Scratched
Stick Condition
Scratched; Minor dents on inside of stick
Boom Base Pin and Bushings
Minimal movement
Pin and Bushings Boom to Stick
Minimal movement
Pins and Bushings Stick to Coupler
Minor to moderate movement
Stick Length
1100mm Stick Length
Turn-table Bearing
Minimal movement
Bottom Covers
Roller Frames
Rusty
Limited Function Check
The main components were functional in a limited check.
Chassis #18
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall Machine Width (Outsides of tracks.)
1350mm Overall width
Grouser Height Measurement
Left side: 10 mm; Right side: 10 mm
Track Belt Width
230mm track belts
Track Belt Condition
See photos for condition; Cuts
Rubber Belt Drive Lugs
See photos for condition
Track Tensioners
See photos for condition
Carrier Rollers
See photos for condition
Front Idler Wear
See photos for condition
Track Rollers
See photos for condition
Sprockets
See photos for condition
Undercarriage #13
Specialty
Excavator Bucket Condition
470mm bucket; 170mm additional bucket; Coupler
Backhoe / Excavator Bucket Shanks and Teeth
Quick Coupler
Manual coupler functional
Blade Condition
900mm with 2no 170mm Extensions
Blade Cutting Edge Condition
Specialty #12
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Jun 19, 2012
Jun 19, 2012
Silicon
10 PPM
11 PPM
Lead
0 PPM
8 PPM
Tin
1 PPM
2 PPM
Copper
3 PPM
8 PPM
Aluminum
7 PPM
3 PPM
Silver
N/A
N/A
Nickel
0 PPM
0 PPM
Chromium
3.3 PPM
0.7 PPM
Iron
60 PPM
44 PPM
Glycol
0
N/A
Water
0
NEG
Fuel
N/A
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:00am to 4pm
No
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 30.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
