CE certificate available from seller - CE mark on machine.
Paint
Scratches; Chips
Sheet Metal (Fiberglass) Condition
Dents; Bent panels; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Glass
Front: Cracked
Seats/Armrests
Seat Belts
Operational
Horn
Operational
Safety Lock Out/Stop
Hydraulic Controls
Drivetrain Controls
Exterior Lights Operational
Yes
Engine Warning Lights
Operational
Gauges
Operational
Hour Meter
10,853 Hours; Digital Display shows:- 10,849 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Not operationally checked; Fan inoperable;
Heater
Not operationally checked
Limited Function Check
The main components operated except as noted.
Hour Meter
Engine
Emission Control Label
Both EPA and EC certification
Blow by @ idle (subjective observation)
Significant
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Final Drives
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Fluid accumulation
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
End of stick
Swing Motor
Boom Lift Cylinder(s)
There is a Weld Repair on both cylinders
Stick Cylinder
Minor to moderate pin and bushing movement
Bucket Cylinder
Minimal pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Stick Condition
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Minor to moderate movement
Pin and Bushings Stick to Bucket
Pins and Bushings Stick to Coupler
Turn-table Bearing
Performs within tolerance expected for age and hours
Bottom Covers
Roller Frames
Limited Function Check
The main components were functional in a limited check.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Tensioners
See photos for condition
Shoe Width
Loose bolts; 600mm track shoes
Grouser Height
Left Side: 18 mm; Right Side: 18 mm
Track link wear
See photos for condition
Pins and bushing wear
See photos for condition
Carrier Rollers Wear
See photos for condition
Track Rollers Wear
See photos for condition
Idlers
See photos for condition
Sprockets
See photos for condition
Undercarriage #1
Specialty
Excavator Bucket Condition
1500mm bucket
Backhoe / Excavator Bucket Shanks and Teeth
Quick Coupler
Hydraulic coupler functional
Specialty #1
Oil Sample Analysis
Engine
date of analysis
Jul 13, 2012
Silicon
16 PPM
Lead
8 PPM
Tin
1 PPM
Copper
3 PPM
Aluminum
5 PPM
Silver
N/A PPM
Nickel
0 PPM
Chromium
1.2 PPM
Iron
46 PPM
Glycol
N/A
Water
N/A
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: ?
You must call at least 24 hours in advance to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Above €31,800
€1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
