Enclosed Cab, A/C, Heater, Perkins Diesel Engine, Aux. Hyd. Plumbing, 2200mm Stick, Tilting Coupler, 2488mm Blade, No Bucket, 10.00-20 Nokia Tyres. No CE certificate available from seller - CE mark on machine.
Meter Reading:
11,049 Hours
Serial Number:
Location:
Stockholm, Sweden
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - CE mark on machine
Paint
Scratches
Sheet Metal (fiberglass) Condition
No visible damage
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
CE Certificate Available
Control Station
Mirrors
Glass
Seats/Armrests
See photos for condition
Horn
Operational
Safety Lock Out/Stop
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Warning Lights
Operational
Gauges
Operational
Hour Meter/Odometer
11,049 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational
Heater
Operational
Limited Function Check (cs)
The main components are in place and operational.
Hour Meter/Odometer
Engine
Make and Model
Perkins; 4 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
Torn or unreadable
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Turbo or Blower
Fluid Accumulation
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
Fluid Accumulation: Valve cover
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check (Engine)
The engine started and ran.
A/C Compressor
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Very slow to respond going in to forward gear
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Fluid accumulation
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Operational
Swing Motor
Boom Lift Cylinder(s)
Minor to moderate pin and bushing movement
Stick Cylinder
Minor to moderate pin and bushing movement
Bucket Cylinder
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Stick Condition
Boom Base Pin and Bushings
Minor to moderate movement
Pin and Bushings Boom to Stick
Minor to moderate movement
Pin and Bushings Stick to Bucket
Minor to moderate movement
Pins and Bushings Stick to Coupler
Minor to moderate movement
Stick Length
2200mm Stick Length
Turn-table Bearing
Bottom Covers
Oily
Limited Function Check
The main components were functional in a limited check.
Stabilizers
Operational; Blade on front and rear off machine
Steering Linkage
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Brake Control
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
10.00-20 front tires; 10.00-20 rear tires; Nokia - All same brand.
Tire Condition
See photos; Cuts; Gouges
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
Specialty
Quick Coupler
Blade Condition
2488mm blade
Blade Cutting Edge Condition
Specialty #1
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 08.00-16.00
.
Loading Dock Available
Ramps Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
