Enclosed cab,Heater, A/C,Volvo Diesel Engine, 2 Piece Boom, 2100mm Stick, 10.00-20 Tires, Hydraulic Quick Coupler, 1650mm Bucket, 2540mm Blade, Rear Stabilizers, No CE certificate available from seller - CE mark on machine,
Meter Reading:
14,053 Hours
Serial Number:
Location:
Ostergotland, Sweden
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - CE mark on machine
Paint
Scratches; Chips
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Cracked; Damaged mounting bracket
Glass
Seats/Armrests
Seat Belts
Operational
Horn
Operational
Safety Lock Out/Stop
Exterior Lights Operational
Yes; Some inoperable
Gauges
Operational
Hour Meter/Odometer
14,053 Hours, No power in batteries to display, This was reading at start of inspection.
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational.
Control Station #1
Engine
Make and Model
Volvo; 4 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
See photos; Fluid Accumulation: Side of engine; Fluid Accumulation: Oil Pan
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
After jump starting the engine ran.; The engine would not re-start after shutting down due to weak batteries.May have alternator or battery problem
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Could only drive machine short distance due to having jump lead's on as battery's where very low.
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
Some components could not be operationally checked. Hydraulic leak on distrubtor valve over transmission
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Dripping leak
Valves
Seepage
Hydraulic Tank
Hoses (Hydraulics)
Boom/Stick: Loose; Boom/Stick: Braid exposure
Auxiliary Hydraulic Plumbing
Operational; Seepage
Swing Motor
Boom Lift Cylinder(s)
Stick Cylinder
Fluid accumulation
Bucket Cylinder
Seepage
Limited Function Check
The hydraulic system was operational except as noted. Seepage on distrubtor valve,
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Stick Condition
Boom Base Pin and Bushings
Moderate movement
Pin and Bushings Boom to Stick
Minor to moderate movement
Pin and Bushings Stick to Bucket
Minor to moderate movement
Pins and Bushings Stick to Coupler
Moderate movement
Stick Length
2100mm Stick Length
Turn-table Bearing
Minor to moderate movement
Bottom Covers
Oily
Limited Function Check
The main components were functional in a limited check.
Stabilizers
Operational
Steering Linkage
Frame Condition
Limited Function Check
The main chassis components functioned with wear in the pivot points.
Brake Control
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
Hydraulic coupler functional; Will only tilt one way
Blade Condition
2540mm blade
Blade Cutting Edge Condition
Specialty #1
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 08.00-16.00
.
Loading Dock Available
Ramps Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
