Previous Next
ITEM DETAILS
Meter Reading
426 Hours
Serial #
34.5" Esco bucket w/thumb, J-B Hendrixs quick coupler, stick length 188", shoe width 31.5", enclosed cab, heater, Isuzu YSZLO6.5BTA eng, 3spd travel

Inspection Report



Please note that as the buyer, you are responsible for reviewing the entire inspection report when evaluating an item.
Summary Protected by IronClad Assurance Protected by IronClad Assurance®
This machine appears to be in very good to excellent overall condition. Cosmetically there is straight sheetmetal and a finish with minor wear and fading. Mechanically the powertrain appears to be in sound condition. The hydraulic system may need minor attention. Please see the report for further details.


General Appearance
Description Rating Details  
cab/operator station The seat needs to be cleaned. Click here to open photos and videos of this item.  
sheet metal (fiberglass) condition
paint Minor fading and scratches. The counterweight has scraped areas. Click here to open photos and videos of this item.  
(2)


Operator Station
Description Rating Details  
steps/ladders
hand rails
mirrors
glass
seats/armrests Needs to be cleaned. Click here to open photos and videos of this item.  
seat belts
exterior lights
horn
warning lights/alarms
safety alarms
oil pressure Normal - Has a warning light.
gauges Click here to open photos and videos of this item.  
hour meter operational? Yes Click here to open photos and videos of this item.  
air conditioner NA
heater
hydraulic controls
powertrain controls Click here to open photos and videos of this item.  
control lock lever
limited function check The controls are smooth in operation with good machine response.
(4)


Engine
Description Rating Details  
hour meter 426
make & model Isuzu - YSZLO6.5BTA
serial # 6BGITAABB-07
emission control label Yes
fuel type Diesel
starter
battery
turbocharger Click here to open photos and videos of this item.  
exhaust system
cylinder head gasket
oil dipstick tube & bonnet
blowby (checked at idle) Minimal
valve cover gasket Click here to open photos and videos of this item.  
oil pan & gasket
injector pump Click here to open photos and videos of this item.  
fuel lines & injector leaks None seen Click here to open photos and videos of this item.  
water pump
radiator Click here to open photos and videos of this item.  
limited function check The engine was slow to start due to the ambient temperature. The engine started easily and ran well after reaching operational temperature. There was no abnormal noise during operation.
(5)


Powertrain
Description Rating Details  
drive/propel motors
final drives
limited function check The drive system was smooth and responsive in all 3 speed ranges.


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Rating Details  
boom & stick condition The bottom of the main boom has minor contact damage. Click here to open photos and videos of this item.  
pins & bushings on boom & stick Minimal wear on the pivot points. Click here to open photos and videos of this item.  
stick length 118"
roller frame
turn-table bearing No noticeable play, minor seepage from the grease seal. Click here to open photos and videos of this item.  
bottom covers
limited function check Components are smooth in operation.
(3)


Hydraulics
Description Rating Details  
pumps
valves There is minor seepage from the main control valve. There is minor oil leakage from the underside of the operators compartment. The source of the leakage is undetermined. Click here to open photos and videos of this item.  
hoses
swing motor Click here to open photos and videos of this item.  
cylinders Click here to open photos and videos of this item.  
cylinder pins and bushings Minimal wear Click here to open photos and videos of this item.  
limited function check The system is smooth and responsive in operation, there is an oil leak of undetermined origin under the operators compartment.
(4)


Undercarriage
Undercarriage wear percentages are estimated averages only. These percentages are based on the average measurements of the undercarriage components and may vary due to the machine application, brand of parts, or OEM specifications available.
Description Rating Details  
track tensioners
shoe width 31 1/2"
overall width of tracks (outside to outside of track shoes) 125 1/2"
grouser height 25 mm Click here to open photos and videos of this item.  
pins and bushings rotated No
track link height 108 mm
pins & bushing wear (internal) 30" - Measured across 5 pins.
pins & bushing wear (external) 58 mm Click here to open photos and videos of this item.  
carrier rollers 119 mm Click here to open photos and videos of this item.  
track rollers 147 mm Click here to open photos and videos of this item.  
front idler height 18.5 mm
sprockets Click here to open photos and videos of this item.  
limited function check The undercarriage functioned properly. Wear percentages are unavailable, actual measurements are given. The system appears to have normal wear for the hours indicated.
(5)


Specialty Equipment
Description Rating Details  
bucket 34 1/2" wide Esco bucket. The machine is equipped with a J-B Hendrix brand quick connector that has minor wear. Click here to open photos and videos of this item.  
cutting edge, shanks, and teeth Minor wear on the teeth. Click here to open photos and videos of this item.  
thumb The machine is equipped with an Esco brand thumb attachment. Click here to open photos and videos of this item.  
(3)
 

Oil Sample Analysis
  engine hydraulic
date of analysis Jan 25, 2002 Jan 25, 2002
analysis by Spectro Spectro
Water 0 % 0 %
Glycol N N
Copper 22 PPM 139 PPM
Aluminum 3 PPM 1 PPM
Silicon 11 PPM 3 PPM
Nickel 1.1 PPM .2 PPM
Tin 9 PPM 1 PPM
Magnesium 72 PPM 5 PPM
Chromium 2.1 PPM .2 PPM
Fuel 5% -
Silver 0 PPM 0 PPM
Iron 21 PPM 3 PPM
Lead 11 PPM 0 PPM
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.