Enclosed Cab, Heater, Kubota Diesel Engine, Aux. Hyd. Plumbing, 1100mm Stick, 235mm Track Belts, Manual (Hammer) Quick Coupler, 300mm Bucket, 200mm Additional Bucket. No CE certificate available from seller - CE mark on machine.
Meter Reading:
2,358 Hours
Serial Number:
Location:
Aragon, Spain
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Some inoperable
Engine Warning Lights
Operational
Travel Alarm
Inoperable
Gauges
Operational
Hour Meter/Odometer
2,358 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
Limited Function Check
The main components operated except as noted.
Hour Meter/Odometer (Start)
Engine
Make and Model
Kubota; D905-E engine; 3 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Fuel System
Operational
Radiator
Oil Leaks
Fluid Accumulation: Side of engine
Fuel Leaks
Seepage: Fuel line
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Final Drives
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Not operationally checked
Boom Swing Cylinders
Fluid accumulation on the left cylinder; Minor to moderate pin and bushing movement
Swing Motor
Boom Lift Cylinder(s)
Minor to moderate pin and bushing movement
Stick Cylinder
Minor to moderate pin and bushing movement
Bucket Cylinder
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Minor dents on bottom of boom
Stick Condition
Boom Base Pin and Bushings
Minor to moderate movement
Pin and Bushings Boom to Stick
Minor to moderate movement
Pin and Bushings Stick to Bucket
Minor to moderate movement
Turn-table Bearing
Bottom Covers
Missing Covers at Engine & Hydraulic Pump areas.
Roller Frames
Limited Function Check
The main components were functional in a limited check.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall Machine Width (Outsides of tracks.)
1350Kg Overall width
Grouser Height Measurement
Left side: 18 mm; Right side: 18 mm
Track Belt Width
235mm Track belts
Track Belt Condition
See photos for condition
Rubber Belt Drive Lugs
See photos for condition
Track Tensioners
See photos for condition
Carrier Rollers
See photos for condition
Front Idler Wear
See photos for condition
Track Rollers
See photos for condition
Sprockets
See photos for condition
Undercarriage #1
Specialty
Excavator Bucket Condition
300mm bucket; 200mm additional bucket
Backhoe / Excavator Bucket Shanks and Teeth
Blade Condition
1340mm blade; Removable Blade.
Attachment (Other)
Hammer Coupler Plate
Specialty #1
Oil Sample Analysis
Engine
date of analysis
Jun 01, 2012
Silicon
4 PPM
Lead
0 PPM
Tin
0 PPM
Copper
0 PPM
Aluminum
1 PPM
Silver
N/A
Nickel
0 PPM
Chromium
1.3 PPM
Iron
21 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am to 1pm; 3pm to 6pm
You must call at least 24 hours in advance to schedule pickup
Loading Dock NOT Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
