Enclosed Cab, Heater, Perkins Diesel Engine, Aux. Hydraulic Plumbing, 1850mm Stick, Rear Stabilizers, 1000mm Bucket, 2400mm Blade. No CE certificate available from seller - CE mark on machine.
Meter Reading:
8,538 Hours
Serial Number:
Location:
Navarre, Spain
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - CE mark on machine
Paint
Not original paint; Touch up paint; Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition
Scrapes; Dents; Cracks; Surface rust in areas; Weld repairs; Bent panels; See photos for condition
Steps/Ladders
No visible damage; See photos for condition
Hand Rails
No visible damage; See photos for condition
General Appearance #1
Control Station
Mirrors
No visible damage
Glass
No visible damage; See photos for condition
Seats/Armrests
Torn cover; See photos for condition
Seat Belts
Operational
Safety Lock Out/Stop
Hydraulic Controls
Worn; Joysticks
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Warning Lights
Operational
Travel Alarm
Inoperable
Gauges
Operational
Hour Meter/Odometer
8,538 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational
Limited Function Check (cs)
The main components are in place and operational.
Hour Meter/Odometer (Start)
Engine
Make and Model
Perkins ; 1548/2000 engine; Serial #: AA80624*U929560; 4 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Minor plugging of fins
Oil Leaks
See photos; Fluid Accumulation: Side of engine; Seepage: Side of engine; Fluid Accumulation: Rear of engine; Seepage: Rear of engine
Fuel Leaks
None seen; See photos
Cooling System Leaks
None seen; See photos
Limited Function Check (Engine)
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Fluid Accumulation
Front Drive Axle
Fluid Accumulation; Noisy
Rear Drive Axle
Fluid Accumulation; Noisy; Two speed differential
Final Drives
Noise
Drive Line
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Fluid accumulation
Valves
Hydraulic Tank
Fluid accumulation
Boom Swing Cylinders
Fluid accumulation on the left cylinder; Heavy pin and bushing movement; Fluid accumulation on the cylinder.
Swing Motor
Boom Lift Cylinder(s)
Fluid accumulation on the left cylinder; Heavy pin and bushing movement
Stick Cylinder
Fluid accumulation; Minor to moderate pin and bushing movement
Bucket Cylinder
Heavy pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Weld repair; Plated; 2nd Piece of boom has Weld Repairs & Plating.
Stick Condition
Scratched; Plated
Boom Base Pin and Bushings
Cracked (See Photos) - Was Repaired.
Pin and Bushings Boom to Stick
Heavy movement
Pin and Bushings Stick to Bucket
Heavy movement
Pins and Bushings Stick to Coupler
Heavy movement
Stick Length
1850mm Stick Length
Turn-table Bearing
Minor to moderate movement
Bottom Covers
Limited Function Check
The main components were functional in a limited check.
Stabilizers
Operational; Weld repairs
Steering Linkage
Heavy movement
Frame Condition
Surface Rust
Suspension Trunnions
Wear consistent with hours and age
Limited Function Check
The main chassis components functioned during a limited check.
Brake Control
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
8.25-20 front tires; 8.25-20 rear tires; All Mitas Brand Tires
Tire Condition
See photos; Cuts; Plugs
Wheel Condition
Bent; Rusty
Wheel Studs, Nuts, Lugs
Chassis #1
Specialty
Excavator Bucket Condition
1000mm bucket; Worn; Worn thin; Weld repaired
Quick Coupler
Hydraulic coupler functional
Blade Condition
2450mm blade; Worn; Dented
Specialty #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
May 20, 2012
May 20, 2012
Silicon
4 PPM
2 PPM
Lead
0 PPM
0 PPM
Tin
0 PPM
0 PPM
Copper
0 PPM
8 PPM
Aluminum
1 PPM
0 PPM
Silver
N/A
N/A
Nickel
0 PPM
0 PPM
Chromium
0 PPM
4.1 PPM
Iron
29 PPM
21 PPM
Glycol
0
N/A
Water
0
NEG
Fuel
N/A
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8.00 - 19.00 hrs
Please check loading facilities' suitability directly with seller; call at least 24 hrs in advance
Loading Dock NOT Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 5.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
