Enclosed Cab, A/C, Heater, Isuzu Diesel Engine, 2300 mm Stick, 600mm Track Shoes, 1450mm Bucket. No CE certificate available from seller - CE mark on machine.
Meter Reading:
18,201 Hours
Serial Number:
Location:
Castilla y Leon, Spain
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - CE mark on machine.
Paint
Scratches; Chips
Sheet Metal (fiberglass) Condition
Scrapes; Dents; Surface rust in areas; Sheet metal deteriorating in areas; Weld repairs; holes on cabin
Steps/Ladders
See photos for condition; bent
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Missing
Glass
See photos for condition; Left: Damaged weather stripping; front blade worn
Seats/Armrests
Torn cover; low area
Seat Belts
Not equipped
Horn
Inoperable
Safety Lock Out/Stop
loose
Hydraulic Controls
Damaged boots; Loose; Worn; Controls stick
Drivetrain Controls
Controls stick; Loose
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes; Some inoperable
Warning Lights
Operational
Travel Alarm
Inoperable
Gauges
Operational
Hour Meter/Odometer
18,201 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Inoperable; Fan inoperable some or all speeds
Heater
Operational
Limited Function Check
The main components operated except as noted.
Hour Meter/Odometer (Start)
Engine
Make and Model
Isuzu; A-6SD1TQA-02 engine; 6 Cylinder Engine; unable to see s/n plate is worn
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational; oil residue on centrifugal axle
Exhaust System
Loose; Leaks at connections; come out damaged
Radiator
Oil Leaks
See photos; Seepage: Valve cover; Seepage: Side of engine; Seepage: Front of engine; Seepage: Oil Pan
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.; except as noted. See oil report.
A/C Compressor
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Noisy
Final Drives
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #3
Hydraulics
Pumps (Hydraulics)
Noisy; Seepage
Valves
Fluid accumulation; Seepage
Hydraulic Tank
Low oil level; due to seepage
Hoses (Hydraulics)
Boom/Stick: Loose; On machine: Loose; Boom/Stick: Worn; On machine: Worn; On machine: Seepage; Boom/Stick: Braid exposure; On machine: Braid exposure
Swing Motor
Seepage
Boom Lift Cylinder(s)
Seepage on the left cylinder; Seepage on the right cylinder; Heavy pin and bushing movement
Stick Cylinder
Seepage; Heavy pin and bushing movement
Bucket Cylinder
Heavy pin and bushing movement
Limited Function Check
The hydraulic system was operational except as noted.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Weld repair; Minor dents on bottom of boom; Scratched
Stick Condition
Scratched; Minor dents on inside of stick
Boom Base Pin and Bushings
Heavy movement
Pin and Bushings Boom to Stick
Heavy movement
Pin and Bushings Stick to Bucket
Heavy movement
Turn-table Bearing
Heavy grease residue; Minor to moderate movement; Performs within tolerance expected for age and hours
Bottom Covers
Missing covers; Oily
Roller Frames
Limited Function Check
The main components were operational with movement as indicated.; except as noted
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Tensioners
See photos for condition
Shoe Width
600mm track shoes
Grouser Height
Left Side: 22 mm; Right Side: 24 mm
Track link wear
Damaged; See photos for condition
Pins and Bushings Turned?
No
Pins and bushing wear
See photos for condition
Carrier Rollers Wear
See photos for condition
Track Rollers Wear
See photos for condition
Idlers
See photos for condition
Sprockets
See photos for condition; heavy wear, noisy when engaged
Undercarriage #1
Specialty
Excavator Bucket Condition
1450 mm bucket; Coupler; Worn; Dented; Weld repaired
Backhoe / Excavator Bucket Shanks and Teeth
Worn or damaged edge; Scalloped edge between teeth
Specialty #1
Oil Sample Analysis
Engine
date of analysis
Jun 19, 2012
Silicon
5 PPM
Lead
0 PPM
Tin
0 PPM
Copper
1 PPM
Aluminum
2 PPM
Silver
N/A
Nickel
0 PPM
Chromium
2.3 PPM
Iron
17 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: -
No - please call 24hrs in advance of pick up
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
