Enclosed Cab, Heater, Case Diesel Engine, Aux. Hyd. Plumbing, Hydrostatic Drive, 2 Piece Boom, 2100mm Stick, Rear Stabilizers, 2480mm Blade, No Bucket, 18R19.5 Tyres. No CE certificate available from seller - No CE mark on machine.
Meter Reading:
3,644 Hours
Serial Number:
Location:
Nord-Pas-de-Calais, France
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - No CE mark on machine
Paint
See photos for condition
Sheet Metal (fiberglass) Condition
Scrapes; Dents; Surface rust in areas; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Cracked
Glass
Seats/Armrests
Torn cover; Inoperable slide or adjustment; Damaged cushion; See photos for condition
Seat Belts
Not equipped
Horn
Operational
Safety Lock Out/Stop
Hydraulic Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Some inoperable
Warning Lights
Operational
Gauges
Inoperable gauges: Fuel; Temp gauge is reading high.
Hour Meter/Odometer
3,644 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
Limited Function Check (cs)
The main components operated except as noted.
Hour Meter/Odometer
Engine
Make and Model
Case ; 6T-590 engine; Serial #: X52111537X
Fuel Type
Diesel
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Fin damage
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check (Engine)
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Fluid accumulation; Seepage; Loose from brackets
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Not operationally checked
Swing Motor
Boom Lift Cylinder(s)
Fluid accumulation on the left cylinder; Fluid accumulation on the right cylinder; Minor to moderate pin and bushing movement
Stick Cylinder
Minor to moderate pin and bushing movement
Bucket Cylinder
Rust pitting in the chrome; Chrome damage (see photos)
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Stick Condition
Minor dents on inside of stick
Boom Base Pin and Bushings
Minor to moderate movement
Pin and Bushings Boom to Stick
Minor to moderate movement
Stick Length
2100mm Stick Length
Turn-table Bearing
Performs within tolerance expected for age and hours
Limited Function Check
The main components were functional in a limited check.
Stabilizers
Operational
Steering Linkage
Minor to moderate movement
Frame Condition
Suspension Trunnions
Limited Function Check
The main chassis components functioned during a limited check.
Brake Control
Park Brake
Held on slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
2480mm blade; Worn; Higher revs are need to operate the blade.
Blade Cutting Edge Condition
Worn
Specialty #1
Oil Sample Analysis
Engine
date of analysis
Apr 16, 2012
Silicon
2 PPM
Lead
13 PPM
Tin
3 PPM
Copper
18 PPM
Aluminum
3 PPM
Silver
N/A
Nickel
0 PPM
Chromium
1 PPM
Iron
34 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:30 - 11:30 / 14:00 - 17:00 hrs
Please check loading facilities' suitability directly with seller; call at least 24 hrs in advance
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 18.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Above €31,800
€1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
