Enclosed Cab, A/C, Heater, Komatsu Diesel Engine, Aux. Hyd. Plumbing, 2400mm Stick, 610mm Track Shoes, 1200mm Bucket. No CE certificate available from seller - No CE mark on machine.
Meter Reading:
10,797 Hours
Serial Number:
Location:
Lazio, Italy
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Some inoperable
Warning Lights
Operational
Gauges
Operational
Hour Meter
10,797 Hours; Inoperable hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational
Heater
Does not Warm
Limited Function Check
The main components are in place and operational.
Hour Meter (Start)
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
Weld repair
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
After jump starting the engine ran.; The engine started and ran with smoke that mostly cleared.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Final Drives
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Noisy; Fluid accumulation; Noisy under load.
Valves
Seepage
Hydraulic Tank
Low oil level
Auxiliary Hydraulic Plumbing
Not operationally checked; End of boom; 2 Flexible Hoses are missing between Boom and Stick
Swing Motor
Noisy; Seepage
Boom Lift Cylinder(s)
Heavy pin and bushing movement
Stick Cylinder
Minor to moderate pin and bushing movement
Bucket Cylinder
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational except as noted.; Hydraulic Pumps are noisy under load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Weld Repais
Stick Condition
Scratched
Boom Base Pin and Bushings
The Support of the Boom Base Pinis welded and plated. Moderate Pin Movement.
Pin and Bushings Boom to Stick
Moderate Movement
Pin and Bushings Stick to Bucket
Heavy movement
Turn-table Bearing
Performs within tolerance expected for age and hours; Noise or roughness from bearing area during swing
Bottom Covers
Bent; Missing covers; Missing bolts; Oily
Roller Frames
Limited Function Check
The main components were operational with movement as indicated.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Tensioners
See photos for condition
Shoe Width
610mm track shoes
Grouser Height
Left Side: 22 mm; Right Side: 22 mm
Track link wear
See photos for condition
Pins and bushing wear
See photos for condition
Track Rollers Wear
See photos for condition; 1 Roller on the left is missing
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:30am to 12:30pm
Call 72hrs in advance of collection
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 30.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
