Straight Blade, Root Rake, Open Operator Station, Sweeps, Rear Screen, Lever Steering Controls, Caterpillar 3306 Engine, Powershift Transmission, 34" Track Shoes. *** ITEM MUST BE PICKED UP WITHIN 14 DAYS TO AVOID STORAGE CHARGES OF $25.00 PER DAY ***
Meter Reading:
Meter Broken
Serial Number:
Location:
Michigan, United States
Zip/Postal Code:48066
(Macomb County)
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Touch up paint; Faded; Flaking; See photos for condition
Sheet Metal (Fiberglass) Condition
Minor dents/scratches; Surface rust; Metal corrosion; Weld repair; See photos for condition
Hand Rails
Bent; Missing; See photos for condition
General Appearance #2
Control Station
Seats/Armrests
Torn cover; The cushion is supported by 2x4s.
Seat Belts
Not equipped
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
Gauge inoperable
Gauges
Inoperable; Broken lens
Hour Meter/Odometer
141 Hours; Inoperable hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check
The main components operated except as noted.
Hour Meter/Odometer
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Significant plugging of fins; Fin damage
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran; There is debris in the belly pan. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Travel Speeds
3
Steering Clutches
Steering Brakes
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load; See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Cavitation noise
Valves
Sticking; Drifts down; The blade control valve sticks while going up.
Hydraulic Tank
Minor dents
Hoses (Hydraulics)
Loose; Worn; Braid exposure
Blade Lift Cylinders
Seepage on the right cylinder; Heavy pin and bushing movement
Blade Tilt Cylinders
Heavy pin and bushing movement; Was not connected to the machine
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Roller Frames
The shields are bent and cracked.
Belly pans
Oily
Equalizer Bar Pivot Points
Wear consistent with hours and age
Limited Function Check (Chassis)
The main components were operational when checked without a load.
Push Arm/C-Frame Condition
Weld repair
Push Arm Pivot/C-FrameTrunnions
Minor to moderate movement
Tilt Linkage Pins and Bushings
Heavy movement
Blade Trunnions/bushings
Minor to moderate movement; Blade: Visible movement
Limited Function Check (dozer)
The main components were operational in a limited check.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Tensioners
See photos for condition
Shoe Width
34" track shoes; Bent pads; Broken pads
Grouser Height
Left Side: 48-55 mm; Right Side: 48-52 mm
Track link wear
See photos for condition
Pins and Bushings Turned?
No
Pins and bushing wear
See photos for condition
Carrier Rollers Wear
See photos for condition
Track Rollers Wear
See photos for condition
Idlers
See photos for condition
Sprockets
See photos for condition; Missing bolts
Pins and bushing wear
Specialty
Blade Condition
11' 5" Blade; Hole/Holes; Weld repair
Other
Root Rake; 11' 8"; Weld repairs; There is hard facing on the teeth and shanks.
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Jul 25, 2012
Jul 25, 2012
Silicon
6 PPM
20 PPM
Lead
3 PPM
62 PPM
Tin
0 PPM
1 PPM
Copper
6 PPM
251 PPM
Aluminum
2 PPM
7 PPM
Silver
0.1 PPM
0.9 PPM
Nickel
0.3 PPM
0.3 PPM
Chromium
0.5 PPM
0.4 PPM
Iron
22 PPM
62 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Oil Sample Analysis
Oil sample analysis not available.
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8-2pm M-F
48 hr notice required *** ITEM MUST BE PICKED UP WITHIN 14 DAYS TO AVOID STORAGE CHARGES OF $25.00 PER DAY ***
Loading Dock Available
Ramps Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before August 28.
This item is subject to Michigan sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
