6 Way Blade, Straight Blade, Enclosed Cab, A/C, Heater, Lever Steering Controls, Caterpillar Engine, Powershift Transmission, 30" Track Shoes. *** See link below for Seller Supplied Maintenance Record ***
Meter Reading:
1,029 Hours
Serial Number:
Location:
Washington, United States
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Minor dents/scratches; Metal corrosion; See photos for condition; The left side latch is broken.
Steps/Ladders
No visible damage; See photos for condition
Hand Rails
No visible damage; See photos for condition
General Appearance #1
Control Station
Mirrors
Cracked
Glass
See photos for condition
Seats/Armrests
See photos for condition
Seat Belts
Operational
Horn
Weak
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Some inoperable
Warning Lights
Operational
Gauges
Operational
Hour Meter/Odometer
1,029 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Does not cool; Vents damaged
Heater
Operational; Vents damaged
Interior
The floor mat is worn.
Limited Function Check
The main components are in place and operational.
Hour Meter/Odometer
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
See photos for condition
Radiator
Minor plugging of fins
Oil Leaks
There is seepage at the side and front of the engine. There is a dripping leak at the valve cover.
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Travel Speeds
3
Steering Clutches
Steering Brakes
Service Brakes
Final Drives
Seepage
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Not visually inspected
Valves
Seepage
Hydraulic Tank
Hoses (Hydraulics)
Blade Lift Cylinders
Seepage on the left cylinder; Seepage on the right cylinder; Minor to moderate pin and bushing movement
Blade Angle Cylinders
Fluid accumulation on the right cylinder; Minor to moderate pin and bushing movement
Blade Tilt Cylinders
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Roller Frames
Rusty; Fluid accumulation at the rollers
Belly pans
Pivot Shafts
Seepage
Equalizer Bar Pivot Points
Wear consistent with hours and age
Limited Function Check (Chassis)
The main components were operational when checked without a load.
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions
Minor to moderate movement
Tilt Linkage Pins and Bushings
Minimal movement; Shims remaining
Angle Linkage Pins and Bushings
Minor to moderate movement
Blade Trunnions/bushings
Minor to moderate movement
Limited Function Check (dozer)
The main components were operational in a limited check.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Tensioners
See photos for condition
Shoe Width
30" track shoes
Track link wear
See photos for condition
Pins and Bushings Turned?
No
Pins and bushing wear
See photos for condition
Carrier Rollers Wear
See photos for condition
Track Rollers Wear
See photos for condition
Idlers
See photos for condition; The left idler is broken.
Sprockets
Chipped; See photos for condition
Pins and bushing wear
Specialty
Blade Condition
10' 8" blade; Weld repair
Blade Cutting Edge Condition
Reversible-Not turned
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Jul 13, 2012
Jul 13, 2012
Silicon
14 PPM
14 PPM
Lead
11 PPM
1 PPM
Tin
4 PPM
1 PPM
Copper
12 PPM
3 PPM
Aluminum
1 PPM
2 PPM
Silver
0.1 PPM
0.1 PPM
Nickel
0.6 PPM
0 PPM
Chromium
1.7 PPM
0.1 PPM
Iron
32 PPM
82 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: M-F, 8:00am - 3:00pm
Must call in advance
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before August 6.
This item is subject to Washington sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $7,500
10% of the final selling price
$7,500 to $31,800
3.85% of the final selling price (min $750)
Above $31,800
$1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
