Blemishes where decals have been removed; Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition
Metal erosion; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Glass
The windshield wiper is broken. Damaged weather stripping
Seats/Armrests
Seat Belts
Operational
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Engine Warning Lights
Operational
Travel Alarm
Operational
Gauges
Operational
Hour Meter/Odometer
2,892 Hours; Inoperable hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational.
Hour Meter/Odometer
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Service Brakes
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
There is braid exposure on the blade cylinder hoses.
Blade Lift Cylinders
Minor to moderate pin and bushing movement; Chrome damage on the left cylinder
Blade Angle Cylinders
Minor to moderate pin and bushing movement
Blade Tilt Cylinders
Minor to moderate pin and bushing movement
Ripper Cylinders
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Rusty
Roller Frames
Rusty
Belly pans
Missing
Limited Function Check (Chassis)
The main components were operational when checked without a load.
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions
Minor to moderate movement
Tilt Linkage Pins and Bushings
Minor to moderate movement
Angle Linkage Pins and Bushings
Minor to moderate movement
Blade Trunnions/bushings
Minor to moderate movement
Limited Function Check (dozer)
The main components were operational in a limited check.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Tensioners
See photos for condition
Shoe Width
28" track shoes
Grouser Height
Left Side: 47 mm; Right Side: 46 mm
Track link wear
See photos for condition
Pins and Bushings Turned?
Rotating bushings
Pins and bushing wear
See photos for condition
Carrier Rollers Wear
See photos for condition
Track Rollers Wear
See photos for condition
Idlers
See photos for condition
Sprockets
See photos for condition
Pins and bushing wear
Specialty
Blade Condition
10' 4" blade
Blade Cutting Edge Condition
Reversible-Not turned
Ripper Condition
Specialty #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Jul 20, 2012
Jul 20, 2012
Silicon
12 PPM
3 PPM
Lead
0 PPM
2 PPM
Tin
0 PPM
0 PPM
Copper
3 PPM
11 PPM
Aluminum
4 PPM
1 PPM
Silver
0.1 PPM
0.7 PPM
Nickel
0.4 PPM
0 PPM
Chromium
0.3 PPM
0 PPM
Iron
28 PPM
3 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 9-4 M-F
Call 24hrs in advance
Loading Dock Available
Ramps Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 31.
This item is subject to Texas sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
