| Inspection Ratings Key |
 |
Limited use or recently replaced, free of visible wear or defects
|
 |
Performs within the tolerances expected for age and type of item |
 |
Although performing, shows indication of needing repair or replacement |
 |
Needs immediate repair/replacement. Requires work if it is to perform
as expected |
|
|
| |
| General Appearance |
| CE Mark (on or near data plate) |
|
|
| Paint |
|
|
| Sheet Metal (fiberglass) Condition |
|
|
| Steps/Ladders |
|
|
| Hand Rails |
|
|
|
General Appearance #2
|
| |
| Control Station |
| Mirrors |
|
|
| Glass |
|
|
| Seats/Armrests |
|
|
| Seat Belts |
|
|
| Horn |
|
|
| Hydraulic Controls |
|
|
| Steering Control |
|
|
| Drivetrain Controls |
|
|
| Oil Pressure |
|
|
| Exterior Lights Operational |
|
|
| Warning Lights |
|
|
| Travel Alarm |
|
|
| Gauges |
|
|
| Hour Meter/Odometer |
|
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
|
| Air Conditioner |
|
|
| Heater |
|
|
| Limited Function Check (cs) |
|
|
|
Hour Meter/Odometer
|
| |
| Engine |
| Make and Model |
|
|
| Fuel Type |
|
|
| Emission Control Label |
|
|
| Blow by @ idle (subjective observation) |
|
|
| Starter |
|
|
| Turbo or Blower |
|
|
| Fuel System |
|
|
| Exhaust System |
|
|
| Radiator |
|
|
| Oil Leaks |
|
|
| Fuel Leaks |
|
|
| Cooling System Leaks |
|
|
| Limited Function Check (Engine) |
|
|
|
Emission Control Label
|
| |
| Drivetrain |
| Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage. |
| Transmission |
|
|
| Travel Speeds |
|
|
| Service Brakes |
|
|
| Drive Motors |
|
|
| Final Drives |
|
|
| Limited Function Check (Drivetrain-Track) |
|
|
|
Drivetrain #1
|
| |
| Hydraulics |
| Pumps (Hydraulics) |
|
|
| Valves |
|
|
| Hydraulic Tank |
|
|
| Hoses (Hydraulics) |
|
|
| Blade Lift Cylinders |
|
|
| Blade Angle Cylinders |
|
|
| Blade Tilt Cylinders |
|
|
| Limited Function Check |
|
|
|
Hydraulics #1
|
| |
| Chassis |
| IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed. |
| Frame Condition |
|
|
| Roller Frames |
|
|
| Belly pans |
|
|
| Pivot Shafts |
|
|
| Equalizer Bar Pivot Points |
|
|
| Limited Function Check (Chassis) |
|
|
| Push Arm/C-Frame Condition |
|
|
| Push Arm Pivot/C-FrameTrunnions |
|
|
| Tilt Linkage Pins and Bushings |
|
|
| Blade Trunnions/bushings |
|
|
| Limited Function Check (dozer) |
|
|
|
Chassis #1
|
| |
| Undercarriage |
| Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail. |
| Overall width (outside to outside of shoes) |
|
|
| Track Tensioners |
|
|
| Shoe Width |
|
|
| Grouser Height |
|
|
| Track link wear |
|
|
| Pins and Bushings Turned? |
|
|
| Pins and bushing wear |
|
|
| Carrier Rollers Wear |
|
|
| Track Rollers Wear |
|
|
| Idlers |
|
|
| Sprockets |
|
|
|
Pins and bushing wear
|
| |
| Specialty |
| Blade Condition |
|
|
| Blade Cutting Edge Condition |
|
|
|
Specialty #1
|
| Oil Sample Analysis |
Hydraulic |
| date of analysis |
May 04, 2012 |
| Silicon |
5 PPM |
| Lead |
1 PPM |
| Tin |
0 PPM |
| Copper |
242 PPM |
| Aluminum |
1 PPM |
| Silver |
1.3 PPM |
| Nickel |
0.1 PPM |
| Chromium |
0.3 PPM |
| Iron |
6 PPM |
| Glycol |
N/A |
| Water |
NEG |
| Fuel |
N/A |
|
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
|
- Buyer is responsible for all costs related to transporting the item.
- Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
- The location information will be provided once full payment has been received.
Shipping Quotes
-
You may request a quote now by contacting any of our Transportation Partners
-
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms
Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
- Hours: 8:30 am–3:30 pm Mon-Fri
- You must call at least 24 hours in advance to schedule pickup
- Loading Dock NOT Available
- Ramps NOT Available
- Forklift Available
- Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
-
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 19.
- This item is subject to Indiana sales tax. (Read more)
- Buyer must pay a transaction fee, based on the final selling price:
| Final Selling Price |
Transaction Fee |
| $1 to $5,000 |
10% of the final selling price |
| $5,001 to $32,500 |
3% of the final selling price (min $500) |
| Above $32,500 |
$975 |
- Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
- All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital 
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit
Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
*Currency conversions are an estimate provided for informational purposes only.
|
Warranty by Premium 2000
