Enclosed Cab, A/C, Heater, Caterpillar Diesel Engine, 1 Shanks Included, Ripper Control, 560mm Track Shoes, 3790mm Blade. Copy of CE certificate available from seller - No CE mark on machine.
Meter Reading:
10,403 Hours
Serial Number:
Location:
Rhone-Alpes, France
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Copy of CE certificate available from seller - No CE mark on machine.
Paint
Not original paint; Scratches; Chips
Sheet Metal (Fiberglass) Condition
Dents; The Latch on the Right Hand Engine Cover is Disconnected.
Steps/Ladders
The step on tghe left side of Blade Arm is damaged/worn away.
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Missing
Glass
Front: Cracked
Seats/Armrests
Seat Belts
Operational
Horn
Operational
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Warning Lights
Operational
Gauges
The Temperature Guage does not register. The Engine & Transmission light rise when the machine is switched off.
Hour Meter/Odometer
10,403 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Does not cool
Heater
Operational; Some of the Air Vents are missing.
Interior
Head liner: Damaged
Limited Function Check (cs)
The main components are in place and operational.
Hour Meter/Odometer (Start)
Engine
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minor to Visible.
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
None seen; Fluid Accumulation: Oil Pan
Fuel Leaks
None seen
Cooling System Leaks
None seen
Ograniczona kontrola funkcji
The engine started and ran.; A/C Compressor Disconnected
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Fluid accumulation; Transmission fluid leaking from Hoses on Rear of Transmission.
Dripping leak on the right cylinder; Heavy pin and bushing movement
Blade Angle Cylinders
Fluid accumulation on the right cylinder; Heavy pin and bushing movement
Ripper Cylinders
Moderate Movement.
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Roller Frames
Belly pans
Oily
Pivot Shafts
Equalizer Bar Pivot Points
Moderate to Heavy Wear
Limited Function Check (Chassis)
The main components were operational when checked without a load.
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions
Heavy movement
Tilt Linkage Pins and Bushings
Heavy movement
Angle Linkage Pins and Bushings
Heavy movement
Blade Trunnions/bushings
Heavy movement
Limited Function Check (dozer)
The main components were operational in a limited check.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Width
2640mm Overall width
Track Tensioners
See photos for condition
Shoe Width
560mm track shoes
Grouser Height
Left Side: 20-24 mm; Right Side: 20-24 mm
Track link wear
See photos for condition
Pins and bushing wear
See photos for condition
Carrier Rollers Wear
See photos for condition
Track Rollers Wear
See photos for condition
Idlers
See photos for condition
Sprockets
See photos for condition
Undercarriage #1
Specialty
Blade Condition
3790mm Blade; Worn; Thin; Hole/Holes; Broken or crack welds
Blade Cutting Edge Condition
Reversible-Not turned
Ripper Condition
Pivot pin wear
Specialty #1
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: ?
You must call at least 24 hours in advance to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before September 3.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
