Previous Next
ITEM DETAILS
Meter Reading
2,139 Hours
Serial #
129" 6-way blade, shoe width 22", Komatsu 6D125E eng, 3spd torqflow trans, aux. hydraulic valve installed for attachments, Canopy w/front sweeps

Inspection Report



Please note that as the buyer, you are responsible for reviewing the entire inspection report when evaluating an item.
Summary Protected by IronClad Assurance Protected by IronClad Assurance®
This machine is in fair to good overall condition. Cosmetically the paint has moderate fading with minor sheet metal damage. The powertrain appears to be sound while the undercarriage could use repair. Please see the report for further details. Please consult oil samples.


General Appearance
Description Rating Details  
operators manual Yes - Water damaged.
cab/operator station
sheet metal (fiberglass) condition Cover on rear of machine under the fuel tank is damaged. Dent in fuel tank and left side of the hood under engine cover mounting. Rust is present on exposed surfaces. Click here to open photos and videos of this item.  
paint Paint has moderate wear and fading. Click here to open photos and videos of this item.  
(2)


Operator Station
Description Rating Details  
steps/ladders NA
hand rails Hand rail mounting broken on right side. Left hand side grab rail on rops is damaged. Click here to open photos and videos of this item.  
mirrors NA
glass NA
seats/armrests Suspension bracket on seat is broken. Click here to open photos and videos of this item.  
seat belts
horn INOPERABLE
exterior lights NA
engine warning lights/alarms Click here to open photos and videos of this item.  
back up alarm INOPERABLE Click here to open photos and videos of this item.  
oil pressure Normal - Low oil pressue warning light.
gauges
hour meter operational Yes
air conditioner NA
heater NA
hydraulic controls Click here to open photos and videos of this item.  
steering controls Click here to open photos and videos of this item.  
powertrain controls
control lock lever
roll over certification label No
limited function check Controls are functional, machine responds well to control inputs.
(6)


Engine
Description Rating Details  
hour meter 2139
make & model Komatsu - 6D125E
serial # Tag not seen.
emission control label Tag not seen.
fuel type Diesel
starter
battery
turbocharger NA
exhaust system Exhaust stack bent at top. Click here to open photos and videos of this item.  
cylinder head gasket
oil dipstick tube & bonnet
blowby (checked at idle) Minimal blowby.
valve cover gasket Click here to open photos and videos of this item.  
oil pan & gasket
injector pump Click here to open photos and videos of this item.  
fuel line & injector leaks
water pump
radiator Coolant level low.
limited function check Engine started and ran properly, has no unusual noise during operation.
(3)


Powertrain
Description Rating Details  
transmission type Torqflow - 3 Forward and three reverse speeds.
torque converter
steering clutches
steering brakes
drive/propel motors NA
final drives
limited function check Shifts and pulls well, no abnormal noise during operation.


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Rating Details  
push arm/C-frame condition
push arm/C-frame rear pivot points MInor wear.
tilt/angle linkage pins & bushings Minor wear. Click here to open photos and videos of this item.  
blade trunnions or bushings Minor wear.
blade lift linkage pins & bushings Minor wear. Click here to open photos and videos of this item.  
equalizer bar
pivot shafts NA
roller frame
belly pans
limited function check Blade assembly is functional, minor wear in pivot points.
(2)


Hydraulics
Description Rating Details  
pumps
valves Auxillary valve is installed, no attachments are present.
hoses
cylinders
cylinder pins and bushings Minor wear in bushings.
limited function check System is functional, has no abnormal noise and has good power.


Undercarriage
Undercarriage wear percentages are estimated averages only. These percentages are based on the average measurements of the undercarriage components and may vary due to the machine application, brand of parts, or OEM specifications available.
Description Rating Details  
track tensioners
shoe width 22"
overall width of tracks (outside to outside of track shoes) 99"
grouser height 32% worn
pins and bushings rotated Yes
track link height 114% worn Click here to open photos and videos of this item.  
pins & bushing wear (internal) Lubricated track wear percentages unavailable.
pins & bushing wear (external) 107% worn
carrier rollers 80% worn Click here to open photos and videos of this item.  
track rollers 100% worn - Some of the track rollers appear to be very tight they are not turning easily.
front idler height 5% worn Click here to open photos and videos of this item.  
rear idler height NA
sprockets Click here to open photos and videos of this item.  
limited function check Functional, components have heavy wear, rails appear to have been wearing against the flanges of the bottom rollers.
(4)


Specialty Equipment
Description Rating Details  
blade condition 6 way blade is 129" wide. Welded on extention is damaged and bent. Click here to open photos and videos of this item.  
cutting edge condition Edge has been turned. Click here to open photos and videos of this item.  
(2)
 
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.