There is a safety certification label with a date of 11/11/10
Safety Certification Report
Safety Certification Report Not Available
- IronPlanet in no way guarantees the validity or accuracy of any safety related documents or labels associated with this item. We strongly recommend a safety inspection is performed before using this item.
Load Chart
Yes
CE Mark (on or near data plate)
No
Paint
Scratches; Chips; Blemishes where decals have been removed; See photos for condition
Sheet Metal (fiberglass) Condition
Minor dents; Scrapes; The cab overhead window brace is broken; Surface rust in areas; See photos for condition
Steps/Ladders
No visible damage
Hand Rails
No visible damage
General Appearance #1
Control Station Crane
Seat Belts
Operational
Mirrors
No visible damage
Glass
No visible damage
Seats/Armrests
Torn cover
Horn
Weak
Anti Two Block
Operational
Hydraulic Controls
Loose; Damaged boots
Drivetrain Controls
Oil Pressure
The gauge registers in the operating range.
Exterior Lights Operational
Yes
Gauges
Some gauges inoperable
Drum Rotation Indicator
Operational
Hour Meter/Odometer
4,059 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Not operationally checked
Limited Function Check (cs)
The main components operated except as noted.
Hour Meter/Odometer
Engine
Make and Model
Cummins B5.9-C engine
Fuel Type
Diesel
Emission Control Label
Both EPA and EC certification
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Turbo or Blower
Operational
Exhaust System
No visible damage
Radiator
Minor plugging of fins
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check (Engine)
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Limited view
Hydraulic Tank
Hoses (Hydraulic)
There is a dripping leak at the boom lines.
Swing Motor
Main Hoist
Auxiliary Hoist
Lift Cylinders
Telescopic Boom Cylinders
Retracts slowly; There is a dripping leak at the control line to the second section.
Cylinder Pins and Bushings
Minor to moderate movement
Limited Function Check
The hydraulic system was operational except as noted; The mid section of the boom retracts slowly.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Outrigger Cylinders
Steering Wheel Play
Minor to moderate movement
Brake Type
Air
Brake Lines/Hoses
Park Brake
Held against power
Limited Function Check
The brake system functioned, stopping and holding the machine.
Turn-table Bearing
Minor to moderate movement
Frame Condition
Tire Size
21.00-25 Tires; Brand(s): Yokohama
Tire Condition
Minor cuts and gouges; See photos
Tread Depth (4 tires)
LF 36 mm; LR 35 mm; RR 35 mm; RF 35 mm
Wheel Condition
Wheel Studs
Limited Function Check
The main chassis components were operational in a limited check.
Outrigger Condition
Outrigger Beams
Outrigger Floats/Pads Condition
Moderate wear
Main Boom Pins
Minor to visible movement
Main Boom Sections
Sheaves
Boom Head Section
Moderate wear
Boom Extension Condition
Wear Pads
Minor to moderate movement and wear
Boom Length
80' Extended boom length; 33' Minimum boom length
Boom Angle Indicator
Limited Function Check (rough terrain)
The main crane components functioned when checked without a load.
Chassis #1
Specialty - Crane
Main Load Block
35 Ton Rated Capacity
Overhaul Ball
Specialty - Crane #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Jun 19, 2012
Jun 19, 2012
Silicon
3 PPM
12 PPM
Lead
0 PPM
3 PPM
Tin
1 PPM
1 PPM
Copper
3 PPM
325 PPM
Aluminum
3 PPM
5 PPM
Silver
0 PPM
0.2 PPM
Nickel
0.2 PPM
0.3 PPM
Chromium
0.4 PPM
0.4 PPM
Iron
9 PPM
25 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 9am to 2pm, Mon-Fri
You must call at least 24 hours in advance to schedule pickup
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 3.
This item is subject to California sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
