82 Ton Capacity, 70’ Mounted Boom, 80’ Unmounted on ground, 150’ Total amount of Boom, Cummins 6 Cylinder Carrier Engine, Cummins NHC250 Upper Engine, 10 Speed Manual Transmission, Counterweights. ***All items must be picked up by close of business August 24th. Any item not picked up by August 24th will be relocated at the buyers expense and subject to storage fees.***
Meter Reading:
37,185 Miles
Serial Number:
Location:
Colorado, United States
Zip/Postal Code:80826
(Lincoln County)
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
There was no safety certification label located on the machine.
Safety Certification Report
Safety Certification Report Not Available
- IronPlanet in no way guarantees the validity or accuracy of any safety related documents or labels associated with this item. We strongly recommend a safety inspection is performed before using this item.
Load Chart
See photos
CE Mark (on or near data plate)
No
Paint
Scratches; Chips
Sheet Metal (fiberglass) Condition
Minor dents; Scrapes; Surface rust in areas; See photos for condition
Steps/Ladders
No visible damage
Hand Rails
No visible damage
General Appearance #1
Control Station
Mirrors
Glass
Left: Cracked
Seats/Armrests
Torn cover
Seat Belts
Operational
Horn
Operational
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
70 PSI
Exterior Lights Operational
Yes
Travel Alarm
Inoperable
Gauges
Operational
Hour Meter/Odometer
37,185 miles; The unit was not driven far enough to determine the functionality of the odometer
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
Interior
Limited Function Check
The main components are in place and operational.
Hour Meter/Odometer
Carrier/Chassis Engine
Make and Model
Make: Cummins; 6 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
None found
Block Heater
Yes
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Air Compressor
Operational
Limited Function Check
The engine started and ran.See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type
Manual; 10 speed transmission
Transmission
Operational
Clutch
Engages
Center Drive Axle
Fluid Accumulation
Rear Drive Axle
Fluid Accumulation
Limited Function Check - Carrier
The drivetrain was operational without a load.
Drivetrain #1
Carrier Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Steering Wheel Play
Minor to moderate movement
Brake Type
Air
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Hoist Drums
Mechanical Draw Works
Boom Drums
Mechanical Draw Works
Hoist and Boom Clutches
Mechanical Draw Works
Main Boom Pins
Pendant Line (Boom Tension Line)
Point Sheaves
Boom Point Section
Gantry/Mast
Boom Stops
Main Boom Chords
Boom Length
10' overall length; 20' base section; 20' tip section
Boom Angle Indicator
Turn-table Bearing
Swing Motor
Limited Function Check
The main chassis components functioned when checked without a load.
Crane Chassis #1
Specialty - Crane
Main Load Block
Johnson brand load block
Overhaul Ball
No tag found
Fairlead
Third Drum
Counterweights
2 counterweights; (1) 10,000 lb. and (1) 20,000 lb.
Boom Dolly
Specialty - Crane #1
Oil Sample Analysis
Engine
Aux. Engine
date of analysis
Jul 30, 2012
Jul 30, 2012
Silicon
3 PPM
3 PPM
Lead
1 PPM
0 PPM
Tin
0 PPM
0 PPM
Copper
27 PPM
5 PPM
Aluminum
1 PPM
0 PPM
Silver
0.1 PPM
0.1 PPM
Nickel
0.6 PPM
0.6 PPM
Chromium
0.3 PPM
0.5 PPM
Iron
8 PPM
11 PPM
Glycol
NEG
NEG
Water
NEG
NEG
Fuel
<5%
<5%
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8-4 M-F
Must pick up between Aug 13-17
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before August 14.
This item is subject to Colorado sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)