15 Ton Capacity, 54 1/2' Maximum Boom Length, 15' Minimum Jib Length, 59 1/2' Maximum Jib Length, Johnson 15 Ton Load Block, Anti-Two-Block, General Motors Vortec Engine, 3-Way Steering, Dual Fuel
Meter Reading:
3,944 Hours
Serial Number:
Location:
Illinois, United States
Zip/Postal Code:60056-5506
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Restriction:
Bidders from Canada:
Before bidding, please check with your Registrar of Imported Vehicles (RIV) regarding admissibility of this vehicle into Canada.
Why?
Certain vehicles from the United States are not admissible into Canada. The Registrar of Imported Vehicles (RIV) was created by Transport Canada to establish and maintain a system of registration, inspection and certification to Canadian standards of vehicles originally manufactured for distribution in the U.S. market that are being permanently imported into Canada. Please visit the RIV website at Registrar of Imported Vehicles - Before you import to learn more details and determine the admissibility of this item.
There is a safety certification label with an expiration date of 7/15/2012
Safety Certification Report
Safety Certification Report Not Available
- IronPlanet in no way guarantees the validity or accuracy of any safety related documents or labels associated with this item. We strongly recommend a safety inspection is performed before using this item.
Load Chart
Yes
CE Mark (on or near data plate)
No
Paint
Not original paint; Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition
Minor dents; Scrapes; Surface rust in areas; See photos for condition
Steps/Ladders
See photos for condition
General Appearance #1
Control Station Crane
Seat Belts
Operational
Mirrors
Glass
See photos for condition
Seats/Armrests
Damaged cushion; See photos for condition
Horn
Operational
Anti Two Block
Operational
Hydraulic Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises; The gauge registers in the operating range.
Exterior Lights Operational
No
Engine Warning Lights
Operational
Gauges
Some gauges could not be properly checked during a short operating period.
Hour Meter/Odometer
3,944 Hours; Operational Hour Meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check
The main components operated except as noted.
Hour Meter/Odometer
Engine
Make and Model
General Motors Vortec Engine
Fuel Type
Dual Fuel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Exhaust System
See photos for condition
Radiator
Oil Leaks
Fluid accumulation: Side of engine; Front of engine; Rear of engine; See photos
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Front Drive Axle
Fluid accumulation; Seepage
Rear Drive Axle
Final Drives
Fluid accumulation; Seepage
Limited Function Check
The drivetrain was operational. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Fluid accumulation
Hydraulic Tank
Hoses (Hydraulic)
Hoses on machine: Seepage
Swing Motor
Main Hoist
Lift Cylinders
Telescope Boom Cylinders
Not visible
Cylinder Pins and Bushings
Minor to moderate movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Outrigger Cylinders
Leak; Left rear outrigger extension cylinder leaking fluid; See photos
Steering Wheel Play
Minor to moderate movement
Brake Type
Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Weak
Limited Function Check
The service brakes performed. The parking brake would not hold the machine.
Turn-table Bearing
Performs within tolerance expected for age and hours
Frame Condition
Tire Size
385/65R22.5 tires; Michelin
Tire Condition
Minor cuts and gouges; Gouges; See photos
Tread Depth (4 tires)
LF 8 mm; LR 9 mm; RR 8 mm; RF 8 mm
Wheel Condition
Wheel Studs
Limited Function Check
The main chassis components were operational in a limited check.
The main crane components functioned when checked without a load.
Chassis #1
Specialty - Crane
Main Load Block
Moderate wear; Johnson J15D10BTB load block; 15 Ton capacity load block
Overhaul Ball
Moderate wear; Johnson overhaul ball; 5 Ton Capacity
Counterweights
Specialty - Crane #15
Oil Sample Analysis
Transmission
date of analysis
May 24, 2012
Silicon
9 PPM
Lead
10 PPM
Tin
1 PPM
Copper
327 PPM
Aluminum
5 PPM
Silver
0.2 PPM
Nickel
0 PPM
Chromium
1.1 PPM
Iron
94 PPM
Glycol
N/A
Water
NEG
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 9-3 M-F
Call 24 hrs in advance to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 12.
This item is subject to Illinois sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
