35 Ton Capacity, 33' Minimum Boom Length, 80' Maximum Boom Length, Grove 35 1/2 Ton Load Block, Heater, Anti-Two-Block, Load Moment Indicator, Cummins 6 Cylinder Diesel Engine, Grove 7 1/2 Ton Overhaul Ball *** See link below for Seller Supplied Crane Safety Certification Report ***
Meter Reading:
900 Hours
Serial Number:
Location:
New York, United States
Zip/Postal Code:10035
(New York County)
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
There was no safety certification label located on the machine.
Safety Certification Report
Safety Certification Report Available; unit passed annual safety inspection in April of 2011
- IronPlanet in no way guarantees the validity or accuracy of any safety related documents or labels associated with this item. We strongly recommend a safety inspection is performed before using this item.
Load Chart
Yes
CE Mark (on or near data plate)
No
Paint
Not original paint; touch up paint; scratches; chips; see photos for condition
Sheet Metal (fiberglass) Condition
Minor dents; scrapes; cracks; surface rust in areas; sheet metal erosion in areas; bent panels; sheet metal deteriorating in areas; bottom of front storage box deteriorating; see photos for condition
Steps/Ladders
No visible damage; see photos for condition
Hand Rails
No visible damage
General Appearance #1
Control Station Crane
Seat Belts
Operational
Mirrors
Glass
Seats/Armrests
Horn
Weak
Safety Lock Out/Stop
Load Moment Indicator
Powers on; not operationally checked with a load; Kruger monitor system; angle/boom
Anti Two Block
Operational
Hydraulic Controls
Drivetrain Controls
Oil Pressure
The gauge registers in the operating range.
Exterior Lights Operational
No
Gauges
Operational
Hour Meter/Odometer
900 Hours; Inoperable Hour Meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Label says does not comply with current emission standards; see photo
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check (Engine)
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Front Drive Axle
Seepage
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulic)
Hoses on machine: worn; age appropriate wear
Swing Motor
Main Hoist
Lift Cylinders
Telescope Boom Cylinders
Not visible
Cylinder Pins and Bushings
Minor to moderate movement
Limited Function Check
The hydraulic system was operational without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Outrigger Cylinders
Steering Wheel Play
Minor to moderate movement
Brake Type
Air
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Held against power
Limited Function Check
The brake system functioned, stopping and holding the machine.
Turn-table Bearing
Performs within tolerance expected for age and hours
Frame Condition
Tire Size
23.5-25 tires; General
Tire Condition
Minor cuts and gouges; see photos
Tread Depth (4 tires)
LF 21 mm; LR 21 mm; RR 21 mm; RF 21 mm
Wheel Condition
Wheel Studs
Limited Function Check
The main chassis components were operational in a limited check.
Outrigger Condition
Outrigger Beams
Outrigger Floats/Pads Condition
Main Boom Pins
Minimal movement
Main Boom Sections
Due to location boom was not fully extended
Sheaves
Boom Head Section
Extension Chains / Cables
Not visible
Wear Pads
Worn
Boom Length
80' extended boom length; 33' minimum boom length
Boom Angle Indicator
Limited Function Check (rough terrain)
The main crane components functioned when checked without a load.
Chassis #1
Specialty - Crane
Main Load Block
Grove; 35 1/2 ton capacity
Overhaul Ball
Grove; 7 1/2 ton capacity
Fairlead
Counterweights
Specialty - Crane #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
May 01, 2012
May 01, 2012
Silicon
3 PPM
12 PPM
Lead
1 PPM
6 PPM
Tin
0 PPM
1 PPM
Copper
6 PPM
60 PPM
Aluminum
2 PPM
10 PPM
Silver
0.1 PPM
0.2 PPM
Nickel
1.5 PPM
0.8 PPM
Chromium
0.4 PPM
1.1 PPM
Iron
6 PPM
13 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am to 2pm, Mon-Fri ONLY
2 Days Notice
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 26.
This item is subject to New York sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
