Back to Search Results / Allen 6048BDF Bridge Deck Finisher
 

Allen 6048BDF Bridge Deck Finisher (#387882)

Search for other Concrete Equipment items

Winning Bid: US $57,000
Won using: Win It Now
 
# of Bids: 1   View Bid History
Sold on: : 12/13/12
Auction Type: Daily Marketplace
SOLD!
Features: Listing consists of two Bridge Deck Finishing machines. All of the following photos depict two machines. The gray machine is the Bid-well, a complimentary machine used to suppport the yellow color Allen 6048BDF machine. The Allen 6048BDF is the main machine for this listing. Seller reports that the Allen has seen very little use, has been under protective covering since last use. Allen comes with (2) Kawaski liquid cooled 27 HP engines,numerous accessory items, additional mainframe sections offering a total approximate paving width of net 66'. Additional main frame sections can be added for incresed paving width, not included. Complete fogging system, 50 Gallon water tank, 15 gallon fuel tank. 2 fogging bars, (2) 48" Wide driven bogies with 6" machine cupped wheels, and (2) 48" wide idler bogies, (2)12" x 24" Augers for finishing, Pressure Washer. 800' of 2 1/2" diamater rail. two barrels of rail attachment hardware.
Meter Reading: See Report
Serial Number:
Location: Nevada, United States
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) Yes
Paint Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition See photos for condition
General Appearance #1
 
Control Station
Seats/Armrests
Seat Belts Not equipped
Hydraulic Controls
Drivetrain Controls
Warning Lights Operational
Hour Meter/Odometer 160 hours; Second hour meter: 105 hours; The machine was not operated long enough to determine the functionality of the hour meters. - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs) The main components are in place and operational.
Control Station #1 Bid-well control station
Control Station #2 Allen control station
Control Station #3 Allen control station
Control Station #4 Allen machine
Control Station #5 Allen machine
Control Station #7 Allen machine
Control Station #8 top view Allen machine
Control Station #9 Allen hour meter
Control Station #11 Allen machine
Control Station #12 Bid-well control station
Control Station #13 Allen control station
Control Station #14 Allen control station
Hour Meter/Odometer
 
Engine
Make and Model Make: Kawasaki ; 27 Hp
Fuel Type Gasoline
Emission Control Label None found
Starter Operational
Exhaust System No visible damage
Radiator
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Engine #6 15 gallon fuel tank
Engine #1
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Limited Function Check The drivetrain functioned without a load.
Drivetrain #1 traveling bogies
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics)
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #4 Bid-well machine
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Leg Condition
Chassis #1 Bid-well add-on main frame sections
Chassis #2 Allen add-on main frame sections
Chassis #3 Bid-well machine
Chassis #4 Photo depicts the gang plank system for the Bid-well machine
Chassis #6 Allen traversing roller tube system
Chassis #9 hose reel assembly for Allen
Chassis #10 Main frame Allen machine
Chassis #12 two barrels of attachment hardware
Chassis #13 Bid-well main frame
Chassis #15 Allen traversing roller tube paver
Chassis #16 control station for Bid-well
Chassis #17 approximatley 800 ft. of 2 1/2" rail
Chassis #18 Bid-well machine
Chassis #19 4ea, 9' sections of gangplank for Bid-well
Chassis #20 Bogies, Bid-well
Chassis #23 Allen traversing roller tube paver
Chassis #24 Allen 50 gallon water tank
Chassis #25 two barrels of rail attachment hardware
Chassis #26 Allen controls
Chassis #27 Allen roller tube assembly
Chassis #29 Allen bogies
Chassis #30 Bid-well bogies
Chassis #31 Allen attachments ofr extra width, and avoiding obstructions
Chassis #32 Bid-well misc, hardware
Chassis #33 Allen mainframe
Chassis #35 Allen traversing roller tube paver
Chassis #36 800 ft. of 2 1/2" rail
Chassis #37 Allen 6048BDF machine
Chassis #38 Allen augers
Chassis #40 Allen 6048BDF
Chassis #42 Bid-well macine
Chassis #43 Allen traversing roller tube paver
Chassis #44 Allen fogging system
Chassis #45 Allen 6048 BDF
Chassis #1
Oil Sample Analysis
Oil sample analysis not available.

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.