Minor dents/scratches; Dents; Surface rust; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Glass
No visible damage; See photos for condition; Left: Plexiglass; Right: Plexiglass
Seats/Armrests
See photos for condition
Seat Belts
Operational
Safety Control Lockout
Operational
Hydraulic Controls
Drivetrain Controls
Loose
Engine Controls
Oil Pressure
Within range
Exterior Lights Operational
Yes; Some inoperable
Travel Alarm
Operational; Back up
Gauges
Operational
Hour Meter
4,419 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational
Heater
Operational
Interior
Good
Limited Function Check (cs)
The main components are in place and operational except as noted.
Hour Meter
Engine
Make and Model
Bobcat 4 cylinder engine
Fuel Type
Diesel
Emission Control Label
Torn or unreadable
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Fuel System
Operational
Exhaust System
No visible damage; See photos for condition
Radiator
Minor plugging of fins
Oil Leaks
See photos; Fluid Accumulation: Side of engine; Fluid Accumulation: Oil Pan
Fuel Leaks
None seen; See photos
Cooling System Leaks
None seen; See photos
Limited Function Check (Engine)
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Not operationally checked
Loader Lift Cylinders
Minor to moderate pin and bushing movement
Bucket Tilt Cylinders
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Belly pans
Roller Frames
Lift Arm Condition
Chassis to Arm Pins
Minor to moderate movement
Quick Coupler to Arms Pins
Minor to moderate movement
Limited Function Check
The main chassis components were operational in a limited check.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall Machine Width (Outsides of tracks.)
6' 7" Overall width
Grouser Height Measurement
Left side: 23 mm; Right side: 24 mm
Track Belt Condition
See photos for condition; Cuts; Chunks out of covering; Right side has damage, wires torn loose
Rubber Belt Drive Lugs
See photos for condition; Visible wear
Track Tensioners
See photos for condition
Carrier Rollers
See photos for condition
Front Idler Wear
See photos for condition
Rear idler wear
See photos for condition
Track Rollers
See photos for condition
Sprockets
See photos for condition
Undercarriage #1
Specialty
Quick Coupler
Manual coupler functional
Loader Bucket Condition
6' 7" General purpose loader bucket
Loader Bucket Cutting Edge/Shanks/Teeth
Worn teeth
Specialty #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Jun 27, 2012
Jun 27, 2012
Silicon
4 PPM
5 PPM
Lead
0 PPM
1 PPM
Tin
0 PPM
1 PPM
Copper
1 PPM
20 PPM
Aluminum
0 PPM
7 PPM
Silver
0.1 PPM
0 PPM
Nickel
0.3 PPM
0 PPM
Chromium
0.1 PPM
0.6 PPM
Iron
3 PPM
32 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: M-F, 9-4
Must call 24 hours in advance
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 5.
This item is subject to Missouri sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
