Enclosed Cab, Heater, Diesel Engine, Rear Aux. Hyd's, 4x4, Hydrostatic Drive, Forward/reverse shuttle, Standard Stick, Rear Quick Coupler, 2200mm GP Loader Bucket, 400mm Rear Bucket, 12.0/12.5-18 Front Tyres, 16.9/14-30 Rear Tyres. No CE certificate available from seller - No CE mark on machine.
Meter Reading:
7,418 Hours
Serial Number:
Location:
Navarre, Spain
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - No CE mark on machine
Paint
Not original paint; Touch up paint; Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition
Scrapes; Dents; Cracks; Sheet metal erosion in areas; Sheet metal deteriorating in areas; Weld repairs; Bent panels; See photos for condition
Steps/Ladders
No visible damage; See photos for condition
Hand Rails
No visible damage; See photos for condition
General Appearance #1
Control Station
Hydraulic Controls
Damaged boots; Worn; Controls Stick
Backhoe Control Configuration
Left stick (Stick and Swing) Right stick (Boom and Bucket); Four lever controls
Mirrors
No visible damage
Glass
No visible damage; See photos for condition
Seats/Armrests
Burn holes; Torn cover; See photos for condition
Seat Belts
Operational
Horn
Inoperable
Drivetrain Controls
Foot pedal sticks; Controls stick
Steering Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
No
Engine Warning Lights
Inoperable
Travel Alarm
Inoperable
Gauges
Operational
Hour Meter/Odometer
7,418 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
Limited Function Check
The main components operated except as noted.
Hour Meter/Odometer (Start)
Engine
Make and Model
None Seen ; Can't fully access the Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Fuel System
Operational
Exhaust System
Weld repair; See photos for condition
Oil Leaks
See photos; Fluid Accumulation: Side of engine; Fluid Accumulation: Rear of engine; Seepage: Rear of engine
Fuel Leaks
None seen; See photos
Cooling System Leaks
None seen; See photos
Limited Function Check
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Front Drive Axle
Dripping Leak; Oil Leaks from the Left Front Wheel
Rear Drive Axle
Fluid accumulation
Final Drives
Fluid Accumulation
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Worn; Fluid accumulation
Hydraulic Tank
Low oil level; Repairs
Hoses (Hydraulic)
Front Loader: Worn; Tractor: Worn; Backhoe assembly: Worn; Front Loader: Braid Exposure; Tractor: Braid Exposure; Backhoe assembly: Braid Exposure; Front Loader: Fluid accumulation; Tractor: Fluid accumulation; Backhoe assembly: Fluid accumulation
Auxiliary Hydraulic Plumbing
Not operationally checked
Loader Lift Cylinders
Fluid accumulation on the left cylinder; Fluid accumulation on the right cylinder; Minor to moderate pin and bushing movement
Bucket Tilt Cylinders
Fluid accumulation on the left cylinder; Minor to moderate pin and bushing movement
Outrigger Cylinders
Minor to moderate pin and bushing movement
Boom Swing Cylinders
Fluid accumulation on the left cylinder; Heavy pin and bushing movement
Boom Lift Cylinder(s)
Fluid accumulation on the left cylinder; Heavy pin and bushing movement
Stick Cylinder
Fluid accumulation; Heavy pin and bushing movement
Bucket Cylinder
Fluid accumulation; Rust pitting in the chrome; Heavy pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Heavy movement
Brake Type
Hydraulic
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake
Weak
Limited Function Check
The brake system functioned, stopping and holding the machine.
Heavy movement; Weld repair; See Photos for Condition
Tilt Linkage Pins and Bushings
Heavy movement; See Photos
Bucket to Arm Pins
See Photos
Limited Function Check
The main components were operational with movement as indicated.
Boom Condition
Dented; Scratched; Weld repair; Plated; Very Worn; See Photos for Condition
Stick Condition
Scratched; Minor dents on inside of stick; Weld repair; Plated; Major dents on inside of stick
Stick Type
Standard stick
Boom Lock (Backhoe)
Missing components
Swing Tower Pivot
Minor to moderate movement; See Photos for Condition
Boom Base Pin and Bushings
Minor to moderate movement; Weld Repairs
Pin and Bushings Boom to Stick
Heavy movement; Weld Repaired; See Photos
Pin and Bushings Stick to Coupler
Heavy movement
Pin and Bushings Stick to Bucket
Heavy movement; Weld Repairs
Outriggers
Street pads; Weld repair
Limited Function Check
The main components were functional in a limited check.
Chassis #1
Specialty
Loader Bucket Condition
2200mm General purpose loader bucket; Worn; Material residue; Dented; Bent; See Photos
Backhoe / Excavator Bucket Condition
400mm rear bucket; Worn; Worn thin; Weld repaired
Backhoe / Excavator Bucket Shanks and Teeth
Worn or damaged edge; Worn or damaged teeth
Rear Quick Coupler
Manual rear coupler; Wear at pin connections
Specialty #1
Additional Photos
Registration Documents
The Original Registration Documents are Available.
Photo #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
May 20, 2012
May 20, 2012
Silicon
2 PPM
5 PPM
Lead
1 PPM
0 PPM
Tin
0 PPM
0 PPM
Copper
0 PPM
4 PPM
Aluminum
0 PPM
1 PPM
Silver
N/A
N/A
Nickel
0 PPM
0 PPM
Chromium
0.3 PPM
0 PPM
Iron
10 PPM
8 PPM
Glycol
0
N/A
Water
0
NEG
Fuel
N/A
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8.00 - 19.00 hrs
Please check loading facilities' suitability directly with seller; call at least 24 hrs in advance
Loading Dock NOT Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 5.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
