Scrapes; Dents; Surface rust in areas; Missing panels; Some Bolts missing on engine side covers; Battery box panel missing; Front grill is bent; See photos for condition
Steps/Ladders
Bent; See photos for condition
Hand Rails
No visible damage
General Appearance #1
Control Station
Hydraulic Controls
Loose; Return to dig is inoperable; Damaged boots; Backhoe lever control knob is missing.
Backhoe Control Configuration
Left stick (Boom and Swing) Right stick (Stick and Bucket); Knob missing on left control
Mirrors
Missing
Seats/Armrests
Torn cover; Damaged cushion; Inoperable slide or adjustment; Seat will not lock into position, turns all the time; Damaged armrest; See photos for condition
Seat Belts
Inoperable
Horn
Inoperable
Drivetrain Controls
Steering Controls
Loose; Tilt steering wheel will not lock in place.
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
No
Travel Alarm
Weak
Gauges
Inoperable gauges: Temp, Fuel; Some gauges could not be properly checked during a short operating period.
Hour Meter/Odometer
9,508.2 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check
The main components operated except as noted.
Hour Meter/Odometer
Engine
Make and Model
Caterpillar 3054 Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Minor plugging of fins
Oil Leaks
Fluid Accumulation from unknown source
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
After jump starting the engine ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Low oil level
Hoses (Hydraulic)
Backhoe assembly: Seepage; Backhoe assembly: Fluid accumulation; Front Loader: Worn
Loader Lift Cylinders
Minor to moderate pin and bushing movement
Bucket Tilt Cylinders
Heavy pin and bushing movement
Outrigger Cylinders
Dripping leak on both cylinders; Heavy pin and bushing movement; Rust pitting in the chrome on both cylinders
Boom Swing Cylinders
Heavy pin and bushing movement; Seepage; Fluid accumulation on the left cylinder
Boom Lift Cylinder(s)
Rust pitting in the chrome on the right cylinder; Seepage on the right cylinder; Minor to moderate pin and bushing movement
Stick Cylinder
Minor to moderate pin and bushing movement
Bucket Cylinder
Seepage; Rust pitting in the chrome; Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational except as noted.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Right tie rod is bent; Steering cylinder wet with oil.
Brake Type
Hydraulic
Master Cylinder
Brake Control
Right pedal is stiff; Requires manually pulling it back to release the brake.
Brake Lines/Hoses
Park Brake
Inoperable
Limited Function Check
The service brakes performed as noted. The park brake would not hold the machine.
The main components were operational with movement as indicated.
Boom Condition
Scratched; Minor dents on bottom of boom
Stick Condition
Minor dents on inside of stick
Stick Type
Standard stick
Boom Lock (Backhoe)
Inoperable; Missing components
Boom Base Pin and Bushings
Heavy movement
Pin and Bushings Boom to Stick
Minor to moderate movement
Pin and Bushings Stick to Coupler
n/a
Pin and Bushings Stick to Bucket
Heavy movement
Outriggers
Street pads; Chunks missing
Outrigger Cylinders
Leaks; Ram Chrome Damage
Limited Function Check
The main components were operational with movement as indicated.
Chassis #1
Specialty
Loader Bucket Condition
7' 5" General purpose loader bucket; Weld repairs
Loader Bucket Cutting Edge
Reversible-not turned
Front Quick Coupler
Hydraulic coupler functional; Leaks
Backhoe / Excavator Bucket Condition
22" Rear Bucket; Dented; Weld repairs
Backhoe / Excavator Bucket Shanks and Teeth
Tooth missing; Worn shank
Forks
Broken tip; Right fork is 45",Left fork is 53".
Specialty #1
Oil Sample Analysis
Engine
date of analysis
Feb 02, 2012
Silicon
1 PPM
Lead
0 PPM
Tin
1 PPM
Copper
14 PPM
Aluminum
0 PPM
Silver
0.2 PPM
Nickel
0.2 PPM
Chromium
0.1 PPM
Iron
11 PPM
Glycol
NEG
Water
NEG
Fuel
<5%
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
You must call at least 24 hours in advance to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 20.
This item is subject to Georgia sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
