Back to Search Results / Case 580 Super K 4x4 Backhoe Loader
 

Case 580 Super K 4x4 Backhoe Loader (#404435)

Search for other Backhoe Loaders items

Winning Bid: US $13,000  
# of Bids: 32   View Bid History
Sold on: : 8/16/12
Auction Type: Featured Auction
SOLD!
Features: Open Operator Station, Case 45-73 Engine, 4x4, Standard Stick, 82" General Purpose Loader Bucket, 24" Rear Bucket. Buyer must remove all items by 8/30/12 or incur transportation and storage fees.
Meter Reading: 662 Hours
Serial Number:
Location: Texas, United States
Zip/Postal Code:77328
(Montgomery County)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents/scratches; Dents; Cracks; Surface rust; plate added to front of unit; See photos for condition
Steps/Ladders Bent; See photos for condition
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Seats/Armrests Damaged cushion; Inoperable slide or adjustment; See photos for condition
Seat Belts Not equipped
Horn Inoperable
Drivetrain Controls Loose boot on shifter
Steering Controls Damaged and loose steering column cover
Transmission Disconnect Control
Hydraulic Controls Damaged boots; Loose
Backhoe Control Configuration Left stick (Boom and Swing) Right stick (Stick and Bucket)
Oil Pressure The gauge registers in the operating range.; 38 PSI
Exterior Lights Operational Yes; Some inoperable and missing
Travel Alarm Inoperable
Gauges Operational
Hour Meter 662 Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check The main components operated except as noted.
Hour Meter
 
Engine
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower Operational
Fuel System Operational
Exhaust System No visible damage
Radiator Significant plugging of fins; damaged fan shroud; fluid accumulation
Oil Leaks Fluid Accumulation: Side of engine
Fuel Leaks See photos; Primer pump has a leak
Cooling System Leaks None seen
Limited Function Check The engine started and ran. The precleaner bowl for the air intake is damaged. See oil report.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational; Seepage
Front Drive Axle Could not disengage
Front Axle Oscillating Pin Wear Heavy movement
Rear Drive Axle
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Dripping leak
Valves Seepage
Hydraulic Tank Low oil level
Hoses (Hydraulic) Front Loader: Braid Exposure; Backhoe assembly: Braid Exposure; cracking, weathered; zip tied in areas; one laying loose on the steering cylinder
Loader Lift Cylinders Heavy pin and bushing movement
Bucket Tilt Cylinders Seepage on the right cylinder; Heavy pin and bushing movement
Outrigger Cylinders Seepage on the left cylinder; Chrome damage on the left cylinder; Chrome damage on the right cylinder; Heavy pin and bushing movement
Boom Swing Cylinders Heavy pin and bushing movement
Boom Lift Cylinder(s) Seepage on the left cylinder; Minor to moderate pin and bushing movement
Stick Cylinder Dripping leak; Minor to moderate pin and bushing movement
Bucket Cylinder Seepage; Heavy pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Heavy movement
Brake Type Hydraulic
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake Inoperable
Limited Function Check The service brakes performed. The park brake would not hold the machine.
Frame Condition Weld repairs
Tire Size 12-16.5 front tires; 19.5L-24 rear tires; Front: Left: Samson; Front: Right: Super traction; Rear: Left: Firestone; Rear: Right: Goodyear
Tire Condition Minor cuts and gouges
Wheel Condition Rusty
Wheel Studs, Nuts, Lugs
Lift Arm Condition Weld repair; Dented at stops
Tilt Linkage
Chassis to Arm Pins Heavy movement
Tilt Linkage Pins and Bushings Heavy movement
Bucket to Arm Pins Heavy movement
Limited Function Check The main components were operational with movement as indicated.
Boom Condition
Stick Condition
Boom Lock (Backhoe)
Swing Tower Pivot Heavy movement
Boom Base Pin and Bushings Heavy movement
Pin and Bushings Boom to Stick Heavy movement
Pin and Bushings Stick to Bucket Excessive wear/damage
Outriggers Street pads; loose at mounting pins
Limited Function Check The main components were operational with movement as indicated.
Chassis #1
 
Specialty
Loader Bucket Condition Weld repaired; Plates added
Loader Bucket Edge Reversible-turned
Backhoe / Excavator Bucket Condition
Backhoe / Excavator Bucket Shanks and Teeth
Specialty #1
Oil Sample Analysis Engine
date of analysis Jul 30, 2012
Silicon 5 PPM
Lead 1 PPM
Tin 0 PPM
Copper 1 PPM
Aluminum 5 PPM
Silver 0.1 PPM
Nickel 0.4 PPM
Chromium 1 PPM
Iron 24 PPM
Glycol NEG
Water NEG
Fuel <5%

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.