Home Page / 2008 Case 580 Super M Series II 4x4 Backhoe Loader

2008 Case 580 Super M Series II 4x4 Backhoe Loader (#486218)

Search for other Backhoe Loaders items

Winning Bid: US $38,000  
# of Bids: 36   View Bid History
Sold on: 1/29/14
Auction Type: Featured Event
Features: Enclosed Cab, A/C, Heater, Tilt Steering Wheel, Ride Control, Case 4 Cylinder Engine, 4x4, Extendable Stick, Rear Auxiliary Hydraulics, 82" Wide General Purpose Loader Bucket, 24" Rear Bucket
Meter Reading: 7,612 Hours
Serial Number:
Location: Kansas, United States
Zip/Postal Code:66607
(Topeka area)
Shipping: Get a shipping estimate and see important pickup terms
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced. Free of visible wear or defects.
Performs within the tolerances expected for age and type of item.
Although performing, shows indication of needing repair or replacement.
Needs immediate repair/replacement. Requires work if it is to perform
as expected.
General Appearance
CE Mark (on or near data plate) No
Sheet Metal (Fiberglass) Condition Minor dents; See photos for condition
Paint Touch up paint; Scratches; See photos for condition
Steps/Ladders See photos for condition
Hand Rails No visible damage
General Appearance #1
Control Station
Mirrors No visible damage
Glass No visible damage
Seats/Armrests Damaged armrest
Seat Belts Operational
Horn Operational
Drivetrain Controls
Brake Control
Steering Control Column does not lock in place
Transmission Disconnect Control
Hydraulic Controls Loose
Backhoe Control Configuration Four lever controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter 7,612 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner The ambient temperature is too cold to check
Heater Operational
Limited Function Check The main components are in place and operational.
Hour Meter
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) No noticeable vapor or pressure
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System No visible damage
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Front Drive Axle
Front Axle Oscillating Pin Wear
Rear Drive Axle
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
See photos for condition
Pumps (Hydraulics)
Hydraulic Tank
Hoses (Hydraulic)
Auxiliary Hydraulic Plumbing Not operationally checked; Rear
Loader Lift Cylinders
Bucket Tilt Cylinders
Outrigger Cylinders
Boom Swing Cylinders
Boom Lift Cylinder(s)
Stick Cylinder
Bucket Cylinder
Limited Function Check The hydraulic system was operational.
Hydraulics #1
Pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Brake Type Hydraulic
Master Cylinder
Brake Lines/Hoses
Park Brake Stopped from a slow roll
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size 12-16.5 Front tires; 19.5L24 Rear tires; Front: Left: Duramax; Front: Right: Supermax; Rear: Right: Goodyear; Rear: Left: Harvest King
Tire Condition See photos; Cuts; Bias ply
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins
Tilt Linkage
Tilt Linkage Pins and Bushings
Bucket to Arm Pins
Limited Function Check The main chassis components were operational in a limited check.
Boom Condition
Stick Condition
Stick Extension Wear Guides
Boom Lock (Backhoe)
Swing Tower Pivot
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pin and Bushings Stick to Bucket
Outriggers Street pads; Damaged / missing
Limited Function Check The main components were functional in a limited check.
Chassis #1
Loader Bucket Condition Worn
Loader Bucket Edge Worn edge; Reversible-turned
Backhoe / Excavator Bucket Condition Worn; Dented
Backhoe / Excavator Bucket Shanks and Teeth Metal welded across teeth
Specialty #1
Oil Sample Analysis engine hydraulic
date of analysis Jan 10, 2014 Jan 10, 2014
Lead 0 PPM 0 PPM
Chromium 0.18 PPM 0.1 PPM
Copper 0.31 PPM 44.93 PPM
Silver 0 PPM 0 PPM
Nickel 0.37 PPM 0.12 PPM
Tin 0 PPM 0 PPM
Aluminum 1.04 PPM 1.72 PPM
Silicon 10.24 PPM 13.51 PPM
Iron 12.81 PPM 15.44 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.