Back to Search Results / 2006 JCB 214E 4x4 Backhoe Loader
 

2006 JCB 214E 4x4 Backhoe Loader (#392683)

Search for other Backhoe Loaders items

Winning Bid: US $21,500  
# of Bids: 17   View Bid History
Sold on: : 6/21/12
Auction Type: Featured Auction
SOLD!
Features: Open Operator Station, 4x4, GP Loader Bucket, 24" Rear Bucket
Meter Reading: 1,409 Hours
Serial Number:
Location: Virginia, United States
Zip/Postal Code:23320-3648
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Paint Scratches; Chips; Two colored in areas; Peeling; Flaking; See photos for condition
Sheet Metal (fiberglass) Condition Scrapes; Cracks; Surface rust in areas; Bent panels; Damaged grill; Side panels cracked; Cowl panel missing; Bent hood cover panel; See photos for condition
Steps/Ladders Bent; See photos for condition
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Hydraulic Controls Damaged boots; Loose boot on loader control; See photos
Backhoe Control Configuration Left stick (Boom and Swing) Right stick (Stick and Bucket)
Seats/Armrests Torn cover; See photos for condition
Seat Belts Operational
Horn Operational
Drivetrain Controls
Steering Controls Steering wheel damage & corrosion; See photos
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Warning Lights Operational
Travel Alarm Weak
Gauges Operational; Fuel gauge inoperable
Hour Meter/Odometer 1,409 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Transmission Disconnect Control
Limited Function Check The main components are in place and operational.
Hour Meter/Odometer
 
Engine
Make and Model 4 Cylinder Engine
Fuel Type Diesel
Emission Control Label Torn or unreadable
Blow by @ idle (subjective observation) Minimal
Starter Operational
Turbo or Blower Operational; Air intake hose disconnected
Fuel System Operational
Exhaust System No visible damage
Radiator
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Clutch Engages
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Slow
Valves
Hydraulic Tank Low oil level
Hoses (Hydraulic) Backhoe assembly: Worn; Backhoe assembly: Seepage
Loader Lift Cylinders Minimal pin and bushing movement
Bucket Tilt Cylinders Minimal pin and bushing movement
Outrigger Cylinders Minimal pin and bushing movement
Boom Swing Cylinders Minimal pin and bushing movement
Boom Lift Cylinder(s) Minimal pin and bushing movement
Stick Cylinder Minimal pin and bushing movement
Bucket Cylinder Minimal pin and bushing movement
Limited Function Check The hydraulic system was operational with low fluid and without a load. See oil report.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Brake Type Hydraulic
Master Cylinder
Brake Control
Park Brake Held against power
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size 14-17.5 front tires; 19.5L-24 rear tires; Firestone; Powerking; Titan
Tire Condition Cuts; Gouges; See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins Minimal movement
Tilt Linkage Pins and Bushings Minimal movement
Bucket to Arm Pins Minor to moderate movement
Limited Function Check The main chassis components were operational in a limited check.
Boom Condition Scratched; Minor dents on bottom of boom
Stick Condition Scratched; Minor dents on inside of stick
Stick Type Standard stick
Boom Lock (Backhoe) Inoperable; Cable broken/damaged; See photos
Swing Tower Pivot Minimal movement
Boom Base Pin and Bushings Minor to moderate movement
Pin and Bushings Boom to Stick Minimal movement
Pin and Bushings Stick to Bucket Minor to moderate movement
Outriggers
Limited Function Check The main components were functional in a limited check.
Chassis #1
 
Specialty
Loader Bucket Condition 88" General purpose loader bucket; Weld residue
Loader Bucket Cutting Edge
Backhoe / Excavator Bucket Condition 24" rear bucket; Weld repaired; Teeth weld repaired
Backhoe / Excavator Bucket Shanks and Teeth Weld repaired
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis Jun 11, 2012 Jun 11, 2012
Silicon 3 PPM 4 PPM
Lead 0 PPM 3 PPM
Tin 0 PPM 1 PPM
Copper 6 PPM 7 PPM
Aluminum 1 PPM 3 PPM
Silver 0.1 PPM 0 PPM
Nickel 0.2 PPM 0 PPM
Chromium 0.1 PPM 0.3 PPM
Iron 7 PPM 4 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.