Scratches; Chips; Weathered; Worn; Faded; See photos for condition
Sheet Metal (fiberglass) Condition
Dents; Cracks; Missing panels; Right side engine cover panel is missing; See photos for condition
Steps/Ladders
Surface rust in areas; Worn; Bent; See photos for condition
Hand Rails
Worn; See photos for condition
General Appearance #1
Control Station
Hydraulic Controls
Damaged boots
Backhoe Control Configuration
Left stick (Boom and Swing) Right stick (Stick and Bucket)
Mirrors
No visible damage
Glass
No visible damage; See photos for condition
Seats/Armrests
See photos for condition; Bottom seat cushion replaced before inspection
Seat Belts
Operational
Horn
Operational
Drivetrain Controls
Steering Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Some inoperable
Warning Lights
Operational
Travel Alarm
Operational; Reverse
Gauges
Operational
Hour Meter/Odometer
4,677 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Transmission Disconnect Control
Limited Function Check
The main components operated except as noted.
Hour Meter/Odometer
Engine
Make and Model
Caterpillar/Perkins 1948/2209 Engine
Fuel Type
Diesel
Emission Control Label
US EPA certification label
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage; See photos for condition
Radiator
Oil Leaks
None seen
Fuel Leaks
Fluid accumulation: Injector line; See photos
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Hydraulic Tank
Low oil level
Hoses (Hydraulic)
Backhoe assembly: Worn; Braid Exposure; Dripping leak; Left a puddle under machine; See photos
Auxiliary Hydraulic Plumbing
Not operationally checked
Loader Lift Cylinders
Minor to moderate pin and bushing movement; Lift cylinder mount on left side of machine has possible crack starting in the weld; limited visual; See photos
Bucket Tilt Cylinders
Minor to moderate pin and bushing movement
Multi Purpose Bucket Cylinders
Fluid accumulation on the left cylinder; Visibly moderate pin and bushing movement
Outrigger Cylinders
Minor to moderate pin and bushing movement
Boom Swing Cylinders
Very visible pin and bushing movement
Boom Lift Cylinder(s)
Moderate pin and bushing movement
Stick Cylinder
Minor to moderate pin and bushing movement
Bucket Cylinder
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Brake Type
Hydraulic
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake
Held against power
Limited Function Check
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size
12.5/80-18 IMP front tires; 19.5LR24 rear tires; Solideal; AGRO Industrial
Tire Condition
See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins
Minor to moderate movement
Tilt Linkage Pins and Bushings
Minor to moderate movement
Bucket to Arm Pins
Minor to moderate movement
Limited Function Check
The main components were operational with movement as indicated.
Boom Condition
Scratched; Cracked; Minor dents on bottom of boom; Shaven metal on edge of the boom; crack starting in center of a original weld in boom; See photos
Stick Condition
Minor dents on inside of stick
Stick Type
Extendable stick; 75" Long retracted. 117" Long extended; Stick lock pin is severely bent; See photos
Stick Extension Wear Guides
Minor to moderate movement
Boom Lock (Backhoe)
Swing Tower Pivot
Minor to moderate movement; Very visible moderate movement
Boom Base Pin and Bushings
Minor to moderate movement; moderate
Pin and Bushings Boom to Stick
Minor to moderate movement; moderate
Pin and Bushings Stick to Coupler
Minor to visible movement
Outriggers
Street pads
Limited Function Check
The main components were operational with movement as indicated.
Chassis #1
Specialty
Loader Bucket Condition
8' Multi-purpose loader bucket
Loader Bucket Cutting Edge
Reversible; turned
Backhoe / Excavator Bucket Condition
24" rear bucket
Backhoe / Excavator Bucket Shanks and Teeth
Worn or damaged edge
Rear Quick Coupler
Manual rear coupler; Functional
Specialty #1
Oil Sample Analysis
Engine
date of analysis
May 30, 2012
Silicon
6 PPM
Lead
3 PPM
Tin
1 PPM
Copper
12 PPM
Aluminum
0 PPM
Silver
0.1 PPM
Nickel
0.3 PPM
Chromium
0.1 PPM
Iron
16 PPM
Glycol
NEG
Water
NEG
Fuel
<5%
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am-4pm, Mon-Fri
You must call at least 24 hours in advance to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 5.
This item may be subject to sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
