Enclosed Cab, A/C, Heater, Komatsu Diesel Engine, 4x4, GP Loader Bucket, Rear Quick Coupler, CE certificate available from seller - CE mark on machine,
Meter Reading:
10,010 Hours
Serial Number:
Location:
Castilla y Leon, Spain
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
CE certificate available from seller - CE mark on machine
Paint
Scratches; Chips
Sheet Metal (fiberglass) Condition
Dents; Cracks; Surface rust in areas; Weld repairs; left front door glass is plexiglass, hinges have been repaired,engine cover re-plated and cracked
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Hydraulic Controls
Loose; Worn
Backhoe Control Configuration
Left stick (Stick and Swing) Right stick (Boom and Bucket)
Mirrors
Glass
No visible damage
Seats/Armrests
Torn cover; Damaged armrest; Damaged frame; Inoperable slide or adjustment; Damaged cushion; frame welded
Seat Belts
Inoperable latch; missing parts
Horn
Operational; Weak
Drivetrain Controls
Loose
Steering Controls
Loose
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes; Some damaged; right front cracked
Warning Lights
Operational
Travel Alarm
Inoperable
Gauges
Operational
Hour Meter/Odometer
10,010 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational; Cool but not cold; Vents damaged
Heater
Operational; Vents damaged
Transmission Disconnect Control
Limited Function Check
The main components operated except as noted.
Hour Meter/Odometer
Engine
Make and Model
Komatsu; S4D106-1FA engine; Serial #: 17823
Fuel Type
Diesel
Emission Control Label
Both EPA and EC certification
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
Loose; Leaks at connections
Radiator
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
The main components were operational with movement as indicated.
Boom Condition
Scratched; Minor dents on bottom of boom
Stick Condition
Scratched; Minor dents on inside of stick
Stick Type
Standard stick
Boom Lock (Backhoe)
Inoperable
Swing Tower Pivot
Heavy movement
Boom Base Pin and Bushings
Heavy movement
Pin and Bushings Boom to Stick
Heavy movement
Pin and Bushings Stick to Coupler
Heavy movement
Outriggers
Dirt pads; Weld repair on Pin & Bush
Limited Function Check
The main components were operational with movement as indicated.
Chassis #1
Specialty
Loader Bucket Condition
2300 mm General purpose loader bucket; Worn; Dented; Weld repaired; plated
Loader Bucket Cutting Edge
Worn segments; Scalloped edge between teeth
Backhoe / Excavator Bucket Condition
600 mm rear bucket; Worn; Dented; Cracked; Weld repaired
Backhoe / Excavator Bucket Shanks and Teeth
Worn or damaged edge; Scalloped edge between teeth
Rear Quick Coupler
Manual rear coupler; Wear at pin connections
Forks
1100 mm forks
Specialty #1
Oil Sample Analysis
engine
transmission
date of analysis
Jun 19, 2012
Jun 19, 2012
Silver
N/A
N/A
Water
0
0
Aluminum
4 PPM
11 PPM
Chromium
1.3 PPM
0.4 PPM
Nickel
0 PPM
0 PPM
Copper
1 PPM
11 PPM
Iron
21 PPM
50 PPM
Silicon
8 PPM
4 PPM
Glycol
0
0
Tin
0 PPM
3 PPM
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:30am to 1:30pm; 3:30pm to 6:30pm
You must call at least 24 hours in advance to schedule pickup
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before September 18.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Above €31,800
€1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
