Back to Search Results / 1999 Midland SP-10 Widener
 

1999 Midland SP-10 Widener (#387353)

Search for other Asphalt Equipment items

Winning Bid: US $55,000
Won using: Win It Now
 
# of Bids: 1   View Bid History
Sold on: : 1/9/13
Auction Type: Daily Marketplace
SOLD!
Features: Open Operator Station, John Deere 4045 Engine, 13" Discharge Conveyor, 10' 11" Wide Hopper. Seller's Comments: 3' Extension w/Additional Hydraulic Motor, Three Extra Blades, High Temp Belt, Gravel Belt, Dirt Belt
Meter Reading: 1,974 Hours
Serial Number:
Location: Mississippi, United States
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition Minor dents; Scrapes; Surface rust in areas; See photos for condition
Steps/Ladders See photos for condition; Bent
Hand Rails No visible damage
General Appearance #1
 
Control Station
Seats/Armrests Torn cover
Seat Belts Not equipped
Horn Inoperable
Steering Control
Drivetrain Controls
Oil Pressure Gauge inoperable
Exterior Lights Operational Some inoperable
Travel Alarm Operational
Gauges Operational; The oil pressure gauge is inoperable.
Hour Meter/Odometer 1,974 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs) The main components are in place and operational. There is no key with this machine.
Hour Meter/Odometer
 
Engine
Make and Model John Deere 4045 engine
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Minimal
Starter Operational
Fuel System Operational
Exhaust System No visible damage
Radiator
Oil Leaks There is fluid accumulation at the side of the engine.
Fuel Leaks There is a dripping leak at the injector line.
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive/propel motors Fluid accumulation
Front Drive Axle
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Minimal movement
Steering Wheel Play Minimal movement
Brake Type Hydraulic
Master Cylinder/Brake Control There is a slight delay before the brakes engage when the pedal is pushed.
Brake Lines/Hoses There is seepage at the rear brakes.
Park Brake Unable to test with slope
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size 425/65R22.5 Tires; Brand: Goodyear
Tire Condition Cuts; Gouges; See photos
Tread Depth LF 7 /32"; LR 5 /32"; RR 1 /32"; RF 3 /32"
Wheel Condition
Wheel Studs
Hopper 10' 11" Wide
Conveyor 13" Wide
Attachments See photos
Chassis #1
 
Hydraulics
Pumps (Hydraulics) Fluid accumulation
Hydraulic Motors
Valves Seepage
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing Number of valves: 3 lines on left and right; Not operationally checked
Cylinder(s)
Cylinder Pins and Bushings Minor to moderate movement
Limited Function Check The hydraulic system was operational without a load. See oil report.
Hydraulics #1
Oil Sample Analysis Engine Hydraulic
date of analysis May 22, 2012 May 22, 2012
Silicon 4 PPM 22 PPM
Lead 0 PPM 2 PPM
Tin 0 PPM 0 PPM
Copper 5 PPM 48 PPM
Aluminum 1 PPM 1 PPM
Silver 0.1 PPM 0 PPM
Nickel 0.3 PPM 0.2 PPM
Chromium 0 PPM 0.3 PPM
Iron 9 PPM 9 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.