375 CFM, 150 PSIG, John Deere 4045T Engine, Single Axle Trailer Chassis, Ball Hitch.
Meter Reading:
3,208 Hours
Serial Number:
Location:
Louisiana, United States
Zip/Postal Code:70072
(New Orleans area)
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Restriction:
Bidders from Canada:
Before bidding, please check with your Registrar of Imported Vehicles (RIV) regarding admissibility of this vehicle into Canada.
Why?
Certain vehicles from the United States are not admissible into Canada. The Registrar of Imported Vehicles (RIV) was created by Transport Canada to establish and maintain a system of registration, inspection and certification to Canadian standards of vehicles originally manufactured for distribution in the U.S. market that are being permanently imported into Canada. Please visit the RIV website at Registrar of Imported Vehicles - Before you import to learn more details and determine the admissibility of this item.
Minor dents; Scrapes; Dents; Surface rust in areas; The right front panel and grill are dented. The bumper is bent; See photos for condition
Cowling, Insulation and Belly Pans
General Appearance #1
Control Station
Gauges
Operational
Oil Pressure
60 PSI
Warning Lights
Operational
Hour Meter
3,208 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs)
The main components are in place and operational.
Hour Meter
Engine
Make and Model
John Deere 4045T engine; Serial #: PE4045ST478292
Fuel Type
Diesel
Emission Control Label
US EPA certification label
Blow by @ idle (subjective observation)
Minimal; The blow by tube is not connected to the engine.
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage; There are weld repairs to the support brackets.
Radiator
Oil Leaks
There is fluid accumulation on the valve cover, oil pan, and side of the engine.
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check (Engine)
The engine started and ran. See oil report.
Emission Control Label
Air Compressor
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Compressor
Minor leak
Oil Separator
Valves, Hoses and Piping
Limited Function Check - Air Compressor
The compressor builds air pressure.
Air Compressor #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Axle Condition
Tire Size
225/75D13 Tires; Brand: Carlisle
Tire Condition
Minor cuts and gouges
Wheel Condition
Wheel Studs
Springs/Hangers Condition
Tongue/ Hitch Condition
2" Ball hitch
Lights/Wiring Condition
Not operationally checked
Marker Lights Functional
Not operationally checked
Brake Lights Functional
Not operationally checked
License Plate Light Functional
Not operationally checked
Frame Rails/ Main Beams Condition
Landing Gear / Tongue Jack
Fuel Tank Condition
Chassis #1
Oil Sample Analysis
Engine
date of analysis
Jul 27, 2012
Silicon
17 PPM
Lead
2 PPM
Tin
1 PPM
Copper
3 PPM
Aluminum
7 PPM
Silver
0.1 PPM
Nickel
4.6 PPM
Chromium
1.6 PPM
Iron
50 PPM
Glycol
NEG
Water
NEG
Fuel
<5%
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: Mon-Fri 9-3
Call 24 hours in advance
Loading Dock Available
Ramps Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before August 14.
This item is subject to Louisiana sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
