Dents; Scrapes; Surface rust in areas; See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station Ground
Hour Meter Reading
Reading: 1,657; Functional
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Gauges
Operational
Hydraulic Controls
Basket rotation inoperable
Oil Pressure
The gauge registers in the operating range.
Limited Function Check (cs)
The main components operated except as noted.
Hour Meter Reading
Control Station - Aerial
Control Console
Safety Lock Out/Stop
Hydraulic Controls
Basket rotation inoperable
Steering Control
Oil Pressure
No oil pressure indicator
Travel Alarm
Operational
Limited Function Check (cs)
The main components operated except as noted.
Control Station - Aerial #1
Engine
Make and Model
Deutz F3L912 engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Fuel System
Operational
Exhaust System
Rust penetration
Oil Leaks
None seen
Fuel Leaks
None seen
Limited Function Check (Engine)
The engine started and ran.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Fluid Accumulation
Final Drives
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Fluid accumulation; Center hydraulic manifold wet with fluid
Hydraulic Tank
Hoses (Hydraulic)
Hoses on main machine: Leaks; Hoses on main machine: Braid exposure; Lines to steer cylinder is leaking. There are two lines in boom lift cylinder area that are not connected to anything
Steering Cylinders
Minor to moderate pin and bushing movement
Boom Lift Cylinder(s)
Minor to moderate pin and bushing movement
Basket Cylinders
Minor to moderate pin and bushing movement; Basket rotation inoperable
Limited Function Check
The hydraulic system was operational except as noted.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Heavy movement; Right side pin is loose and missing bolt
Frame Condition
Limited Function Check
The main chassis components functioned with wear in the pivot points.
Park Brake
Held on slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
15-19.5NHS front tires; 15-19.5NHS rear tires; Front: Left: General; Front: Right: Denman; Rear: Left: General; Rear: Right: General
Tire Condition
Cuts; Gouges; Foam filled; Left rear valve stem missing
Wheel Condition
Left front has dents around bead
Wheel Studs, Nuts, Lugs
Turn-table Bearing
Performs within tolerance expected for age and hours
Bottom Covers
Swing Motor
Boom Condition
Boom Wear Guides
Dry and worn
Cable Tray Ladder
Extension Chains/sprockets
Rusty
Max Lift Height
60 ft. max lift height
Max Weight Capacity
500 lb. max weight capacity
Work Basket
Railing bent
Operators Manual
No
ANSI Guidelines
No
Chassis #1
Oil Sample Analysis
Oil sample analysis not available.
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:30am - 3:30pm; Mon-Fri
Call 24 hours in advance of pick up
Loading Dock NOT Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 5.
This item is subject to North Carolina sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
