Touch up paint; Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition
Dents; Scrapes; Cracks; Surface rust in areas; See photos for condition
Operators Manual
Yes
ANSI Guidelines
No
General Appearance #1
Control Station Ground
Hour Meter
2,647 hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Function Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Engine Warning Lights
Operational
Safety Alarm
Operational
Limited Function Check
The main components are in place and operational.
Hour Meter
Control Station Upper
Control Console
Horn
Operational
Emergency Shut Off Switch
Loose knob; Functional
Safety Control Foot Switch
Operational
Function Controls
Engine Warning Lights
Limited Function Check
The main components are in place and operational.
Control Station Upper #1
Engine
A propane fuel tank will not be included with this unit at the time of sale. HAZMAT Certificates may be required for transport. IronPlanet is not responsible for the disposal of any remaining product or residue.
Emission Control Label
US EPA certification label
Blow by @ idle (subjective observation)
Minimal
Fuel System
Operational
Exhaust System
Leaks at connections
Radiator/Oil Cooler
Oil Leaks
Fluid Accumulation: Valve cover; Fluid Accumulation: Side of engine
Fuel Leaks
None Seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Final Drives
Limited Function Check
The drivetrain functioned without a load.
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulic)
Cracks and cuts on some hoses; Weathered
Steering Cylinders
Minimal pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minimal movement
Frame Condition
Brake System
Tire Condition
Minor cuts and gouges; Foam filled; Hardware embedded in tire
Wheel Condition
Wheel Studs, Nuts, Lugs
Turn-table Bearing
Performs within tolerance expected for age and hours
Bottom Covers
Swing Motor
Boom Condition
Boom Wear Guides
Cable Tray Ladder
Work Basket
Chassis #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Jul 06, 2012
Jul 06, 2012
Silicon
3 PPM
7 PPM
Lead
0 PPM
2 PPM
Tin
0 PPM
0 PPM
Copper
3 PPM
7 PPM
Aluminum
0 PPM
1 PPM
Silver
0.1 PPM
0 PPM
Nickel
0.7 PPM
0.2 PPM
Chromium
0.2 PPM
0.2 PPM
Iron
4 PPM
9 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am to 4pm M/F
Must call 24hrs prior pick up
Loading Dock NOT Available
Ramps Available
Forklift NOT Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 17.
This item may be subject to Alberta sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
