Touch up paint; Scratches; Chips; Paint overspray; See photos for condition
Sheet Metal (fiberglass) Condition
Minor dents; Surface rust in areas
Steps/Ladders
See photos for condition; moderate damage
Hand Rails
See photos for condition; basket railing is bent
Operators Manual
Yes
ANSI Guidelines
No
General Appearance #1
Control Station Ground
Hour Meter
1,345 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Function Controls
Oil Pressure
No oil pressure indicator
Safety Alarm
Operational
Limited Function Check
The main components are in place and operational.
Hour Meter
Control Station Upper
Control Console
Overspray; Labels missing or hard to read
Horn
Operational
Emergency Shut Off Switch
Functional
Upper Function Controls
Limited Function Check
The main components are in place and operational.
Control Station Upper #1
Engine
A propane fuel tank will not be included with this unit at the time of sale. HAZMAT Certificates may be required for transport. IronPlanet is not responsible for the disposal of any remaining product or residue.
LP Tank
LP tank included
Emission Control Label
US EPA certification label
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
See photos; Fluid Accumulation: Valve cover; Fluid Accumulation: Side of engine
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. There is sealant visible at the valve cover.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Fluid accumulation
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics - Aerial
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Lift Cylinders
Minimal pin and bushing movement
Steering Cylinder
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics - Aerial #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Brake System
The brake system functioned, stopping and holding the machine.
Steering Linkage
Frame Condition
Scissor Linkage
Minimal movement
Platform Condition
Dented; Bent railing; Cracked weld
Platform Extension
Tire Condition
Minor cuts and gouges; Plugs; Foam filled; See photos
Wheel Condition
Wheel Studs
Limited Function Check (Scissor-lift)
The main components functioned with minor wear throughout.
Chassis #1
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: M-F 7-3
Please call 1 day in advance to schedule pickup.***All items must be picked up within 8 days of the auction to avoid storage fees. Items not picked up within 20 days of the auction will be relocated at the buyer’s expense. ***
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 30.
This item is subject to California sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
