Open Operator Station, Deutz Diesel Engine, 4x4, Hydrostatic Drive, 14m Max Lift Height, 230Kg Max Weight Capacity, Swivel Basket, 33x15.50-16.5 OTR Tyres. CE certificate available from seller - CE mark on machine.
Meter Reading:
2,800 Hours
Serial Number:
Location:
Galicia, Spain
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
CE certificate available from seller - CE mark on machine.
Paint
Scratches; Chips
Sheet Metal (fiberglass) Condition
Dents; Cracks; Surface rust in areas; Weld repairs; Scrapes; missing or inoperable latchs
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
CE Certificate Available
Control Station - Aerial
Control Console
Overspray; Labels missing or hard to read
Horn
Operational; Weak
Safety Lock Out/Stop
Hydraulic Controls
Loose; Worn
Steering Controls
Loose
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Engine Warning Lights
Operational
Travel Alarm
Operational; Weak
Gauges
Operational
Hour Meter/Odometer
2,800 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check
The main components operated except as noted.
Hour Meter/Odometer (Start)
Engine
Make and Model
Deutz; F3M 2011 engine
Fuel Type
Diesel
Emission Control Label
Both EPA and EC certification
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Fuel System
Operational
Exhaust System
Loose
Oil Leaks
None seen
Fuel Leaks
See photos; Seepage: Injector line
Limited Function Check
The engine started and ran.; except as noted. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Seepage
Final Drives
Limited Function Check
The drivetrain was operational except as noted.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Seepage
Hydraulic Tank
Low
Hoses (Hydraulic)
Hoses on boom: Loose; Hoses on main machine: Loose; Hoses on boom: Worn; Hoses on main machine: Worn; Hoses on boom: Braid exposure; Hoses on main machine: Seepage
Steering Cylinders
Minor to moderate pin and bushing movement; minor oil and grease residue
Boom Swing Cylinders
Seepage on the right cylinder; Minor to moderate pin and bushing movement
Boom Lift Cylinder(s)
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational except as noted.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Frame Condition
Limited Function Check
The main chassis components functioned with wear in the pivot points.
Brake Control
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
33x15.50-16.5 front tires; 33x15.50-16.5 rear tires; All OTR Brand Tyres.
Tire Condition
Cuts; Gouges
Wheel Condition
Bent; minor
Wheel Studs, Nuts, Lugs
Turn-table Bearing
Performs within tolerance expected for age and hours
Bottom Covers
Swing Motor
Seepage; Wet with residue
Boom Condition
Boom Wear Guides
Worn thin
Jib Condition
Cable Tray Ladder
Bent; minor
Extension Chains/sprockets
Max Lift Height
14m max lift height
Boom Extension/jib Length
1245mm jib
Max Weight Capacity
230Kg max weight capacity
Stabilizer Cylinders
Work Basket
Railing bent; Rust; dents,holes
Operators Manual
No
ANSI Guidelines
No
Chassis #1
Oil Sample Analysis
Engine
date of analysis
Jun 10, 2012
Silicon
8 PPM
Lead
1 PPM
Tin
2 PPM
Copper
3 PPM
Aluminum
7 PPM
Silver
N/A
Nickel
1 PPM
Chromium
2.1 PPM
Iron
27 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am to 6pm
Call at least 24hs in advance
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before October 1.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
