Blemishes where decals have been removed; Scratches; Chips; Fading; See photos for condition
Sheet Metal (fiberglass) Condition
Scrapes; surface rust in areas; Paint overspray; Scratches; See photos for condition; There is rust erosion on work basket kick panel.
General Appearance #1
Control Station Ground
Hour Meter Reading
Reading: 1,335 Hours; Functional; There is an hour meter replacement/change label that reads 4,245 Hours.
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Hydraulic Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Engine Warning Lights
Operational
Limited Function Check
The main components are in place and operational.
Hour Meter Reading
Control Station - Aerial
Control Console
Overspray; Labels hard to read
Horn
Operational
Safety Lock Out/Stop
Hydraulic Controls
The drive and lift/swing boots are torn.
Steering Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Engine Warning Lights
Operational
Limited Function Check
The main components are in place and operational.
Control Station - Aerial #1
Engine
Make and Model
Deutz F4M1011F engine; Serial #: 10535744
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Recirculating system; Minor
Starter
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Final Drives
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Minor fluid accumulation
Valves
Minor fluid accumulation
Hydraulic Tank
Minor fluid accumulation
Hoses (Hydraulic)
Steering Cylinders
Boom Lift Cylinder(s)
Minor seepage
Basket Cylinders
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Brake Control
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
Brands: Titan and Firestone
Tire Condition
See photos; Cuts; Gouges
Wheel Condition
Wheel Studs, Nuts, Lugs
Turn-table Bearing
Minimal movement
Bottom Covers
Swing Motor
Boom Condition
Boom Wear Guides
Cable Tray Ladder
Extension Chains/sprockets
Max Lift Height
60' max lift height
Max Weight Capacity
1,000 lb. weight capacity
Work Basket
Railing bent; Weld repair; Rust; Control decal damage/overspray; The door is welded.
Operators Manual
Yes
ANSI Guidelines
Yes
Chassis #1
Oil Sample Analysis
engine
date of analysis
May 14, 2012
Silver
0.1 PPM
Water
0
Aluminum
6 PPM
Chromium
0.3 PPM
Nickel
0.2 PPM
Copper
3 PPM
Iron
23 PPM
Silicon
12 PPM
Glycol
0
Tin
0 PPM
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: M-F 8-3
Must call at least 1 day in advance to arrange for pick up
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 12.
This item is subject to Wisconsin sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
