Open Operator Station, Hatz Diesel Engine, 4x4, Hydrostatic Drive, 12.5m Max Lift Height, 500Kg Max Weight Capacity, Platform Extension, 12-16.5 Tyres. CE certificate available from seller - CE mark on machine.
Meter Reading:
1,709 Hours
Serial Number:
Location:
South Holland, Netherlands
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
CE certificate available from seller - CE mark on machine
Paint
Scratches; Chips
Sheet Metal (fiberglass) Condition
Minor dents; Scrapes
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
CE Certificate Available
Control Station
Control Console
Horn
Operational
Safety Lock Out/Stop
Hydraulic Controls Upper
Hydraulic Controls Lower
Steering Controls
Travel Alarm
Inoperable
Hour Meter/Odometer
1,709 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check
The main components operated except as noted.
Hour Meter/Odometer (Start)
Engine
A propane fuel tank will not be included with this unit at the time of sale. HAZMAT Certificates may be required for transport. IronPlanet is not responsible for the disposal of any remaining product or residue.
Make and Model
Hatz; 2L41C engine; Serial #: 1021200009795
Fuel Type
Diesel
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Fuel System
Operational
Exhaust System
No visible damage
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Noisy in top gear and under braking
Front Drive Axle
Rear Drive Axle
Final Drives
Drive Line
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Brake
Stopped machine when rolling
Steering Linkage
Moderate Movement
Frame Condition
Scissor Linkage
Rust penetration on link arms
Platform Size
1700mm wide x 5900mm with platform extended
Platform Condition
Underside of platform is rusty
Platform Extension
Tire Size
12-16.5 Front tires; 12-16.5 Rear tires
Tire Condition
Minor cuts and gouges
Wheel Condition
Wheel Studs
Outriggers / Stabilizers
Noisy in operation
Limited Function Check (Scissor-lift)
The main components functioned with minor wear throughout.
Chassis #1
Hydraulics - Aerial
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Low oil level
Hoses (Hydraulics)
Weathered; Chafed
Cylinder(s)
Cylinder Pins and Bushings
Moderate Movement
Hydraulics - Aerial #1
Oil Sample Analysis
Oil sample analysis not available.
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8.00 - 17.00 hrs
Please call at least 24 hours before pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
