|
|
31 Results found for "Construction"; "Aggregate"
Please wait...
IronClad Assurance We don't paint the tracks, and we don't hide the dents. We show you
the dirt, and we stand by our word
The IronPlanet IronClad Assurance® symbol lets you know that one of our
inspectors has personally visited the item and conducted a visual inspection of
key components, taken photographs, taken selected measurements and
retrieved oil/fluid samples for lab analysis.
The findings from each inspection are presented free of charge for you to
review before bidding on the Equipment. We provide assurance to you
that this inspection report is a fair representation of the Equipment in its
true condition.
Buy with confidence at IronPlanet Auctions. With the IronClad Stamp of
Assurance you can be confident that "what you see (in the Inspection Report*) is
what you get (when you receive the Equipment)".
*The Inspection Report and the specific terms and conditions of the IronClad
Assurance are set forth in the IronPlanet Terms and Conditions.
Restrictions
Using the line items, including all photos, of our
Inspection Report as the basis for comparison, the buyer has one business day
after receipt of the equipment to report to IronPlanet any claim of a
significant discrepancy between the condition of the equipment received and the
condition described in the Inspection Report, when IronClad Assurance applies.
In the case that a claim is filed in accordance with the terms and conditions
(see IronPlanet Terms and Conditions section VI), and if the discrepancy is
validated through the IronPlanet dispute resolution process, IronPlanet may
either elect to refund the purchase price plus transportation costs to the
buyer, or settle such claim in another mutually beneficial manner to the
buyer.
Please Note: All disputes must be submitted prior to
constructive receipt of the equipment, as per Section V of the IronPlanet Terms
and Conditions, and are subject to a $500 deductible.
| Sort by:
Year | Make | Model | Type
|
|
|
Meter
|
IronClad Assurance
|
Current Bid
|
Auction ends
|
|
|
|
2001 SMI 107C Wheeled Scalper Aggregate Screen
Open control area, Deere 4045 engine, 11R22.5 tires, 135" overall screen deck width, 2 screen decks. Seller Comments: Equipment is approved with California EPA Statewide Portable Equipment Registration Program. Please see Specifications link below for additional information.
|
CA
|
|
1544
|
|
US $20,000
|
15 hours 55 minutes
|
|
|
|
2006 JCI-FT300 Mobile Cone Crushing Plant
Deere 6125 engine, hydraulic drive, 75" x 108" hopper, 41 1/2" feed and discharge belts, 23 1/2" track shoes. Manufacturer specs: 11" feed opening, 53' 3" length, 11' 6" width
|
UT
|
|
3132
|
|
US $96,000
|
22 hours 25 minutes
|
|
|
|
2003 Eagle 1000 Portable Crushing Plant
Triple axle chassis, Deere 6 cyl. diesel engine, 255/70R22.5 tires, 198" x 77" hopper, 24" feed conveyor, 18" left discharge belt, 48" right discharge conveyor ~ Load out of this item will be the responsibility of the buyer. Buyer will also be responsible for any additional disassembly for trucking. At least 24 hours advance.
|
MD
|
|
8318
|
|
US $80,000
|
2 days 21 hours
|
|
|
|
2006 (unverified) Cedarapids 1100-11 Cobra Track Mounted Jaw Crusher
126" x 576" x 145" overall dimensions, Cummins diesel engine, 168" x 126" hopper, 24" & 42" discharge belts, 20" track shoes, remote control
|
NY
|
|
442
|
|
US $100,000
|
4 days 15 hours
|
|
|
|
2005 (unverified) Keestrack Pioneer Screen Plant
Ground control station, Deutz diesel engine, 156" x 96" hopper, 32" left, 40" right, and 52" end discharge belts, 171" x 66" 2 deck screen deck, 48" feed conveyor, 18" track shoes
|
NY
|
|
2616
|
|
US $40,000
|
4 days 15 hours
|
|
|
|
2002 (unverified) Extec Screen Mobile - Screen Plant
Single axle trailer chassis w/ king pin plate, Deere 2.9L diesel engine, grizzly bars, 215/72R17.5 tires, air brakes. The engine started and ran. The hydraulic system responded to the controls, but leaks near the control valve. The screen panels are missing. This machine is not complete or fully operational.
|
NY
|
|
---
|
|
US $7,500
|
4 days 15 hours
|
|
|
|
2001 (unverified) Viper 122 Screen Plant
Deutz diesel engine, 60" discharge belt width, 9'10" x 7' 6" deck, 385/65-22.5 front tires, 230/75R22.5 tires
|
NY
|
|
---
|
|
US $15,000
|
4 days 15 hours
|
|
|
|
Portable - Crushing Plant
Cat 3412 500KW Generator Set mounted in a 35’ trailer w/14 starter switches, portable 1,000 gal. fuel tank, Universal 24X36 Jaw Crusher mounted on a tandem axle trailer w/control station, El-Jay model RC54STD cone crusher and Cedar Rapids model 40X24 roll crusher mounted on a tandem axle trailer, 1-El-Jay FS6142 6’x14’ double deck screen and 1- 6’x16’ secondary screen mounted on a tandem axle trailer, 36” x 40’ conveyor off jaw crusher, 36’x42” conveyor off cone/roll crusher, 30”x32’ conveyor off screen, 30’x30’ conveyor off screen, 30’x42’ transfer conveyor. Seller Comments ~ Electrical wiring vandalized, seller willing to assist with loading for transport.
|
OR
|
|
---
|
|
US $100,000
|
4 days 19 hours
|
|
|
|
Pioneer 4' Portable Cone Crusher
Electric powered cone and discharge conveyor on tandem axle carrier
|
NY
|
|
---
|
|
US $25,000
|
6 days 20 hours
|
|
|
|
Pioneer 153-PRVE T/A Portable Crusher
Vibratory feeder, electric driven jaw crusher, 34" end discharge conveyor, tandem axle carrier w/ air breaks, 10.00-20 tires. The unit was not pulled. The components were not operationally checked. The machine was disassembled and all loose hardware was not accounted for.
|
CA
|
|
---
|
|
US $30,000
|
9 days 20 hours
|
|
|
|
2008 SMI 516T Tracked Aggregate Screen
Ground control/Remote control, Cummins QSB 4.5L engine, 93"x201" hopper, 16'Lx5'W screen deck, 19 3/4" track shoes."Seller Comments" Equipment is approved with California EPA Statewide Portable Equipment Registration Program.
|
CA
|
|
17
|
|
US $100,000
|
10 days 17 hours
|
|
|
|
2005 SMI MIGHT Wheeled Trommel Aggregate Screen
Single axle trailer w/ pintle hitch, Yanmar 3TNA72-EJS engine, 7.00x15 tires, 36" diameter screen, 72" x 36" hopper. "Seller Comments" Equipment is approved with California EPA Statewide Portable Equipment Registration Program.
|
CA
|
|
22
|
|
US $15,000
|
10 days 17 hours
|
|
|
|
Cedarapids VSI 2100 Portable Crusher
Portable crusher, Cummins KTA 19C engine, Twin Disk manual clutch, open CMC table, hydraulic lid, single 42" discharge belt to the rear, tandem axle carrier (42'L x 102"W), 11R22.5 tires, pin legs.
|
ND
|
|
1841
|
|
US $40,000
|
10 days 22 hours
|
|
|
|
2005 Pegson Premiertrak AX866 26x44 Crushing Plant w/ Micro-Tech 2000 System
Hydraulic jaw-size adjustment, remote control, Cat C-9 engine, 156" x 84" hopper w/folding sides, Micro-Tech 2000 weighing and monitoring system, magnetic separator, end and side discharge conveyors, 20" track shoes
|
CO
|
|
3011
|
|
US $80,000
|
11 days 1 hour
|
|
|
|
McCloskey 621RE Trommel Screen
Cat 3056E engine, Front swivel conveyor, 29 1/2" front belt, 42" center belt, 36" rear belt, 11R22.5 front tires, 315/80R22.5 Rear tandem axle tires. Brand Names: Firestone, Bridgestone, Kumho. The engine started and ran. The hydraulic system was operational. The main components appear to be in place and operational. The functionality of the remote was not tested.
|
MI
|
|
1996
|
|
US $50,000
|
11 days 15 hours
|
|
|
|
Powerscreen Power Shredder 1800 Mobile Shredder
Cat C-9 8.8L engine, 55 1/2" wide conveyor, 19 3/4" track shoes. The drivetrain engaged in forward and reverse, The hydraulic system was operational, the main components appear to be in place and operational. The functionality of the remote was not tested.
|
MI
|
|
194
|
|
US $80,000
|
11 days 15 hours
|
|
|
|
Extec IC13 Portable Horizontal Shaft Impact Crusher w/Tri-Axle Carrier
Deutz V-6 diesel engine, 275/70R22.5 Firestone tires, Air bag suspension, 19 3/4" track shoes, 38 1/2" conveyor belt. The drivetrain engaged in forward and reverse. The hydraulic system was operational. The main components appear to be in place and operational. Inspector noted that the engine starts easier if fuel primer pump is operated first.
|
MI
|
|
3173
|
|
US $70,000
|
11 days 15 hours
|
|
|
|
2006 Superior 36" x 60' STK Conveyor
36"x60' conveyor w/ manual stabilizers, electrically powered, hopper extension, support brackets, equipped w/Belt Way conveyor belt scale system. The motor was not ran and the components could not be functionally checked. The item appears to be generally complete.
|
TX
|
|
---
|
---
|
TBD
|
Dec 3
|
|
|
|
2006 Superior 36" x 60' Conveyor
|
TX
|
|
---
|
---
|
TBD
|
Dec 3
|
|
|
|
2005 Powerscreen T Chieftan 2100 Screen
Deutz BF-4M-2012 engine, hydrostatic drive, 40" feed conveyor, (2) 32" and (1) 48" discharge conveyor, 13' x 5' hopper, (2) 21' x 5' screen decks, hydraulic stabilizers, 19 1/2" track shoes
|
TX
|
|
5329
|
---
|
TBD
|
Dec 3
|
|
|
|
2002 Superior Telestacker 36"x150' TS150 Conveyor
Tandem axle mounted conveyor, 36"x 150', 480v electrically operated, hydraulic raise, electronic controls, manual stabilizers, 11R22.5 tires. The trailer was not pulled. The components were not operationally checked.
|
TX
|
|
---
|
---
|
TBD
|
Dec 3
|
|
|
|
2001 Terex Finlay 693 Track Mobile Screen
158"x65" hopper, 77" grizzly length, 6" spacing between grizzly bars, 20'x5' incline screen, Deutz 4 cylinder engine, 32" side discharge belts, 48" end discharge belt, 4 hydraulic stabilizer jacks, 385/65R22.5 tires
|
TX
|
|
---
|
---
|
TBD
|
Dec 3
|
|
|
|
2000 Telsmith 3055PPVGF Jaw Crusher
Stationary 20' x 9' vibratory grizzly feeder, 3055 jaw, 200 HP electric motor. ***The portable discharge conveyor parked under the crusher is not included with item***
|
TX
|
|
---
|
|
US $89,000
|
Dec 3
|
|
|
|
2000 Telsmith 52S-HS-CC Cone Crusher & Screening Plant
20' x 6' double deck horizontal screen, 300 HP electric driven cone crusher, 42" under crusher side discharge conveyor, 48" under screen end discharge conveyor, tri axle carrier w/hydraulic stabilizers, switch gear and power cords. All components are electrically operated.
|
TX
|
|
---
|
---
|
TBD
|
Dec 3
|
|
|
|
McClousky Conveyor
Conveyor w/hydraulic stabilizers, 42" feed conveyor, 480 volt, electrically powered, hydraulic raise, 11R22.5 tires. The motor ran. The hydraulic system was functional. The hydraulic raise was not functionally checked. The item appears to be generally complete. The trailer was not pulled. The components were not operationally checked.
|
TX
|
|
---
|
---
|
TBD
|
Dec 3
|
Compare
See side-by-side inspection reports
Items per page:
|